User manual KLIPSCH ACD11

[. . . ] Read Instructions ­ All safety and operating instructions should be read before operating the device. Retain Instructions ­ The safety and operating instructions should be retained for future reference. Heed Warnings ­ All warnings on the device and in the operating instructions should be adhered to. Follow Instructions ­ All operating and safety instructions should be followed. [. . . ] 3. Signal Input Connections The GMX control module has three audio inputs (see Fig. 4A): Toslink optical digital, coaxial digital (orange RCA jack), and stereo analog (red and white RCA jacks). Use these inputs to connect audio sources, such as a game console, DVD player, CD player, computer sound card, or TV set. Whenever possible, use one of the digital inputs, since this will allow Dolby Digital playback. 4B illustrates a setup in which a game console, DVD player, and TV set are connected to the GMX D-5. 1. Important Note: Each input demands a particular type of cable and a matching output on the source component. The coaxial digital input requires a coaxial cable with RCA plugs on each end. To ensure reliable operation, use a cable labeled for video or digital audio connections. The stereo analog input requires a pair of ordinary shielded audio cables with RCA plugs on each end. If you are connecting the analog inputs to a device that has a minijack output, use the supplied miniplug-to-RCA adaptor. IMPORTANT NOTE: Before You Begin Do not plug in the GMX D-5. 1 subwoofer's power cord until all other wiring is completed, and do not disassemble the system before you have unplugged the subwoofer's power cord. Be especially careful not to connect or disconnect any signal cables while power is applied. However, new settings made at high volumes will only be allowed as the total reaches 60dB. In other words, if the main volume reads 55dB, the boost will be limited to +5dB, and if main volume is set to 60dB (maximum), no boost is available. Toggles through the three modes of the Dolby Digital dynamic compression function. Dynamic compression reduces the level difference between loud and soft sounds. This can be useful when you are having trouble hearing dialogue clearly or when you want to minimize disturbance of others by very loud sounds. Available modes are "Half, " "Full, " and "Off"; the selected mode will be indicated by the LEDs above the button. "Off" selects no compression, whereas "Full" selects maximum compression. This function is available only when the system is processing a Dolby Digital input. Use the volume pads to raise or lower the bass level until you get the balance of lows to highs that you want. The central display will show how much boost or cut you have applied, in decibels (dB). Pressing the button again until the LED goes out will lock the setting and return the volume pads to master mode, controlling overall level. [. . . ] Only the front left and right satellites and the subwoofer are active. FIGURE 4A WA R R A N T Y U. S. AND CANADA KLIPSCH, LLC ("KLIPSCH") warrants this product to be free from defects in materials and workmanship (subject to the terms set forth below) for a period of one (1) year from the date of purchase. During the warranty period, KLIPSCH will repair or replace (at KLIPSCH's option) this product or any defective parts. Proof of purchase in the form of a bill of sale or receipted invoice, which is evidence that this product is within the warranty period, must be presented or included to obtain warranty service. [. . . ]