User manual KIDDY LIFE PLUS

[. . . ] The kiddy life plus is checked and approved according to the standard ECE 44-03. it received the design certification for the category "universal". This means that it may be used in all vehicle types on seats with 3-point vehicle belt in accordance with ECE 16 or comparable standards. With the impact shield the permissible load limits (according to ECE-44-03) fall short by up to 80%. [. . . ] Do not continue to use the child restraint system if parts have been damaged or loosened after an accident (accident speed greater then 10 km/h) or through other effects. 1 Choice of seat Please read up on using child restraint systems in your vehicle manual or your authorised repair shop. The child restraint system can be fitted on any seat in vehicles that have a 3-point belt system. Position the vehicle seat so that the back rest of the child restraint system is on that of the vehicle seat. If the fitting is hindered by a head support, this has to be set accordingly. The child restraint system kiddy life plus can also be used on car seats facing backwards with 3-point belt. 1 Setting the back rest and the shoulder supports The height is ideally set if the head is comfortable in the neck support and the diagonal belt rests on the middle of the shoulder. By using the straps pull the back rest frame (d) out of the fastening in the rest part. Position the height of the back rest according to the size of the child. Now set the shoulder rests according to the shoulder width of your child. 2 Setting the seat surface length (thigh rest) Bigger children will have significantly more seating comfort by pulling out the seat ramp (fig. Once you have your required seat length, press ramp (e) into the appropriate snap-on device. 3 Setting the lying down position The lying down position should only be used for children with a body weight of up to 18 kg or for children up to 4 years of age. - Turn the support frame as far backwards as possible so that it is on the back rest of the vehicle seat. - To secure the child in the lying down position, please proceed as in item 5. If during the journey the lying down position is set, the vehicle must be stopped and the child secured again. Securing the child with the impact shield and vehicle's own 3-point belt The impact shield should only be used for children with a body weight of approx. We recommend using the seat cushion for children with a body weight of 9 ­ 13 kg (approx. The seat cushion is fastened with the rubber band on the child seat (fig. To enable the child better freedom of movement the shoulder rests should be brought into centre position (see item 4. Once the child is seated, insert the impact shield from both sides into the lap belt guide and push it up to the child. Feed the lap belt through the slots of both outer, red guides of the impact shield. [. . . ] If you require replacement covers, you can order these from your dealer. 4 Cleaning the plastic parts The plastic parts can be cleaned with a damp cloth. Procedure after an accident After an accident resulting from a speed of over 10km, the child restraint system must be checked by the manufacturer for possible damage and if required, replaced. Guarantee For this child restraint system we offer a 2 year guarantee for manufacturing or material defects. [. . . ]