User manual KIDDY INFINITY PRO

[. . . ] Read the instruction manual carefully before fitting the child restraint system for the first time. You risk endangering your child's life if the product is used incorrectly. The child restraint system must always be used with the appropriate impact shield. Use the appropriate seat cushion for children with a body weight of 9 - approx. [. . . ] The kiddy infinity pro can also be used on rear-facing car seats, fitted with a 3-point belt system. If the installation is hindered by a head rest, this must be used in the top setting. The movable back rest of the kiddy infinity pro guarantees that this rests against the car back rest. 1 Height adjustment of seat cushion The kiddy infinity pro has a seat cushion, which guarantees size adjustment between approx. The seat cushion can be adjusted to the size of your child at multi-level. Go about setting the seat cushion as follows: 13­18 months; seat cushion folded apart (fig. In order to achieve the correct setting of the seat position with the seat cushion, you must always position the adjustable headrest properly. 2 Headrest adjustment The kiddy infinity pro offers an individual adjustment to your child's size with its height adjustable headrest. Wrong, too low Wrong, too high The correct seat position setting is achieved when the child's head rests in the middle area of the head rest. Move the yellow height adjustable handle on the reverse of the headrest, by pulling it slightly out while at the same time moving the headrest up or down, depending on the height required (fig. Always check that the adjusted parts of kiddy are locked securely in place by pulling on the adjusted part slightly. 3 Setting the sleeping position The kiddy infinity pro is fitted with a sleeping position, which guarantees comfortable and secure seating during longer journeys. To set the sleeping position, first release the vehicle's belt system. Pull the kiddy infinity pro as far forward as possible so that the black supporting clamp, located on the back of the seat part, can be folded back. Then push the kiddy infinity pro against the back rest of the vehicle seat. In its opened state, the supporting clamp must lie against the back rest of the vehicle seat. The back rest of the kiddy infinity pro can be swivelled into the sleeping position. The sleeping position is then achieved when the back rest of the child seat lies against the vehicle seat rest (fig. Undo the vehicle belt, change the position of the supporting clamp and back rest and then secure your child (the child restraint system) again. To secure the child in the sleeping position, please proceed as described in item 5. Your kiddy infinity pro may only be used with the appropriate impact shield. Once your child is seated, push the impact shield into the guide slots on the seat part (fig. [. . . ] If you need replacement covers, these can be ordered from your dealer. 2 Cleaning the toy figures The toy figures can be cleaned with a damp cloth. 3 Cleaning the plastic parts The plastic parts can be cleaned with a mild cleaning agent or a damp cloth. Procedure after an accident After an accident resulting from a speed of over 10km, the child restraint system must be checked by the manufacturer for possible damage and then replaced if necessary. [. . . ]