User manual KIDDY GUARDIAN PRO

[. . . ] For use in your vehicle, please follow the manufacturer's recommendations in your owner's manual, or contact your dealership. Please read the entire instruction manual thoroughly before installing the child restraint system for the first time. For children weighing 9-18kg, the child restraint system must always be used with the appropriate impact shield (M) and seat cushion (K). Use the child restraint system only for weight classes I to III (from 9kg up to 36kg maximum). [. . . ] The innovative adjustment system of the kiddy guardian pro provides the optimal adjustment to the size of your child by adjusting the headrests (G) and shoulder rests (H) in one movement. The correct headrest setting is achieved when the head of your child lies in the narrowest position of the headrest (G) (Fig. To adjust the head (G) and shoulder rests (H), grasp the height adjustment handle (Q) on the back of the headrest (G) and pull it out gently, while simultaneously raising or lowering the headrest (G) to the desired height (Fig. Check to see that the headrest (G) is firmly locked in place by gently pressing down on it. The kiddy guardian pro is equipped with a reclined position that ensures comfortable and safe seating particularly on longer trips. To set the reclined position, first unfasten your vehicle's own restraint system if necessary. The reclined position may be used only for children in Age Group I (9-18kg) in conjunction with the impact shield. Pull the kiddy guardian pro forward far enough so that the sleeping clamp (E) found on the back of the child seat can be unfolded (Fig. The sleeping clamp (E) must rest against the backrest of the vehicle's seat in its unfolded position. the kiddy guardian pro's backrest (C) can then be lowered to the reclined position. The reclined position is reached when the headrest (G) of the child seat rests against the backrest of the vehicle (Fig. Unfasten the vehicle restraint, change the position of the sleeping clamp (E) and the backrest (C), and then secure your child (the child restraint system) again. Check to see whether your kiddy is adjusted to the size or body weight of your child (Section 5). The kiddy guardian pro is secured with the three-point vehicle restraint using the belt guide on the impact shield (N) (Fig. Push the impact shield (N) into the guide slots on the seat section (Fig. Slide the impact shield back so that it rests right on your child's tummy. Place your child in the seat and ensure that the child's buttocks press against the backrest (C). Your kiddy guardian pro may only be used for Age Group I with the impact shield (M) and seat cushion (K) belonging to it. Then pull your vehicle's three-point restraint out far enough so that it goes around your kiddy and can be directly fastened in your vehicle's own seatbelt lock (Fig. Make sure that the seatbelt tongue locks securely in place with a noticeable "click. [. . . ] If you require replacement covers, you can order them from the manufacturer. The plastic parts can be cleaned with a mild cleanser or with a damp cloth. After an accident with an impact speed greater than 10 km/h, the child restraint system must be sent back to the manufacturer without fail, to be checked for possible damages and replaced at no charge if deemed necessary. For the kiddy guardian pro we extend a warranty against defects in materials and workmanship for up to two years. [. . . ]