User manual KIDDY FIX

[. . . ] You can find out from the attached vehicle type list, in which vehicles and on which seat the kiddyfix (A) can be used. please note that the vehicle type list is continuously expanded and updated. It is imperative that you read the kiddyfix (A) and kiddy child car safety seat instruction manuals and comply with all warnings and instructions. The kiddyfix (A), in combination with the kiddy child safety car seat, has been tested and approved in accordance with the latest version of the Safety Standard ECE-R44/04. [. . . ] Now remove the battery clip by pushing the opening tab to the back and lifting out the clip. The markings on the bottom of the compartment indicate how the batteries must be inserted (Fig. Empty batteries can be disposed of free of charge at specialist dealers, where batteries are sold. Never use another attachment (bracket) than described in this manual or on the product label!Prior to installation, check whether your vehicle is fitted with ISOFIX brackets (metal brackets between the seat and backrest) and consult the vehicle type list and vehicle user manual! For this purpose, pull the yellow support base handle (I) at the front (Fig. 1), slide the support base (G) slightly inwards and fold the support leg (F) out (Fig. This closes the power circuit for the electric release and the sound signals. The support leg (F) must be folded out prior to installation in the vehicle. Now check whether the anchoring system of your kiddyfix is released by pressing both yellow ISOFIX unlatching buttons (E) at the top on the sides of the support leg (F) (Fig. Press (click) both funnels guides (M) onto the brackets between the seat and backrest of the vehicle seat (Fig. Proper latching is confirmed by a sound signal as well as the green ISOFIX display (E) (Fig. Now slide the yellow connectors (L) onto the metal brackets and press tightly against it. Check that the mechanical parts latch in correctly by trying to retract the support base (G) without activating the support base handle (I). Your kiddyfix must always be used with folded out and correctly adjusted support base (G)!To achieve this, activate (1) the yellow support base handle (I) and pull the support base (G) out until it stands firmly on the floor of the vehicle and both support foot displays indicate red (Fig. Prior to every trip, check whether all systems are correctly latched, or adjusted. Now you can install your kiddy child safety car seat according to its instruction manual on the kiddyfix (A). [. . . ] Because it contains electric components, your kiddyfix may under no circumstances be cleaned under running water. After an accident resulting from a speed of more than 10km, it is imperative to have your kiddy be checked by the manufacturer for possible damage and then replaced if necessary. For your kiddy we extend a warranty against defects in materials and workmanship for up to 2 years. The guarantee is limited to products, which have been handled appropriately and are returned in a clean and sound condition. [. . . ]