User manual KETTLER XTR 1

[. . . ] for Your Safety The crosstrainer should be used only for its intended purpose, Any other use of the equipment is prohibited and may be dan- The manufacturer cannot be held liable for damage or injury caused by improper use of the equipment. This is particularly true for the attachment of grip strap, running plate and fastening of the handlebar and front tube. [. . . ] If, in spite of this, children are allowed to use the equipment, ensure that they are instructed in its proper use and supervised accordingly. Before use, always check all screws and plug-in connections as The unit complies with class S of the standard EN 957-1/-2-4. If the appliance is not intended for domestic use, please note that the onus is on the owner to ensure that the appropriate measures are put in place with respect to accessibility and supervision. The appliance may only be operated in public places under qualified supervision. The scope of such supervision shall depend on who the users are: their degree of reliability, age, ex- Well as respective safety devices fit correctly. Mobile telephones) directly next to the cockpit or the electronic controlsystem as otherwise values displayed might be distorted (e. Ensure that you have received all the parts required (see check The fastening material required for each assembly step is sho- Should you have any cause for complaint, please contact your KETTLER dealer. Before assembling the equipment, study the drawings carefully Use the fastening material exactly as instructed. Bolt all the parts together loosely at first, and check that they And carry out the operations in the order shown by the diagrams. The equipment must be assembled with due care by an adult If in doubt call upon the help of a second person, if possible technically talented. [. . . ] A weak or an extinguished computer display makes a battery change necessary. When inserting the batteries pay attention to the designation Should there be any misoperation after switching on the com- Puter again, shortly disconnect the batteries once again and reinsert them. [. . . ]