User manual KETTLER THUNDER

[. . . ] Please care for the fact that the scooter is only used on safe ground. In case of a sudden and/or strong turn of the handlebar the scooter could be caused to tip. The scooter must not be connected with other vehicles, sports or similar devices and not be driven/pulled by them. [. . . ] the use of protective gear and a Safety Helmet is highly recommended. Ensure that the toy vehicle is not used until it has been properly assembled and checked by an adult person. Therefore, safeguard the scooter against rolling away Instruct your child how to use the vehicle correctly and draw attention to possible sources of danger. Although dangerous situations are unlikely to occur if the toy is used correctly, children at play should, if possible, be supervised. Please bear in mind that there is always a danger of children injuring themselves while using swings, climbing frames, toy vehicles or similar equipment. When using the toy vehicle, the user should always wear strong closed toe shoes. When children are at play, situations may arise which cannot be predicted by the manufacturer and for which he cannot be held responsible. Before use, always check all screws and plug-in connections as well as respective safety devices fit correctly. Lubricate the bearing sleeves of the wheels and the handlebars with a few drops of oil every two or three months. Study the assembly instructions carefully before be2 This is essential for the safe function and use of the scooter. Please note that there is always a danger of injury when working with tools or doing manual work. Ensure that your working area is free of possible sources of danger, for example don't leave any tools lying around. Always dispose packaging material in such a way that it may not cause any danger. There is always a risk of suffocation if children play with plastic bags!Bolt all the parts together loosely at first, and check that they have been assembled correctly. Tighten the locknuts by hand until resistance is felt, then use wrench to finally tighten nuts completely against resistance (locking device). Attention: once locknuts have been unscrewed they no longer function correctly (the locking device is destroyed), and must be replaced. The grips can be pushed onto the handlebars more easily if they are first soaked in warm water. [. . . ] Manufacturer warrants this product to be free from defects in material at the time of the product's tender of delivery for a period of 3 years for residential use and 1 year for non-residential use. This Limited Warranty is not transferable and does not cover normal wear and tear (including, but not limited to, damage and wear to tires, power shocks, drive belts and other non-durable parts). The liability of the manufacturer under this Limited Warranty shall not include any liability for direct, indirect, or consequential damages resulting from the defect. [. . . ]