User manual KETTLER SPLASH

[. . . ] This KETTLER product has been designed in accordance with the latest standards of safety and subjected to constant quality monitoring. The data gained from this quality process is then incorporated in the development of our products. For this reason, we reserve the right to make changes in design and technology in order to offer our customers products of the highest standard of quality at all times. In spite of this, should you have any ground for complaint, please contact your KETTLER International Inc. [. . . ] This child's wheeled toy conforms to the stipulated safety regulations European standard EN 71-1/3 (, , Safety regulations for childrens toys"). Incorrect repairs or alterations (removal of original parts or addition of other parts etc. Never use near steps, slopes, driveways, hills, roadways, alleys or swimming pool areas. the use of protective gear and a Safety Helmet is highly recommended. Ensure that the toy vehicle is not used until it has been properly assembled and checked by an adult person. In case of tricycles without a free-wheel consider the fact that the pedals will rotate even when the tricycle is pushed. Therefore, safeguard the tricycle against rolling away Never draw the tricycle behind you as long as a child is seated on it. Instruct your child how to use the vehicle correctly and draw attention to possible sources of danger. Although dangerous situations are unlikely to occur if the toy is used correctly, children at play should, if possible, be supervised. Please keep original packaging of this article, so that it may be used for transport at a later date, if necessary. Please bear in mind that there is always a danger of children injuring themselves while using swings, climbing frames, toy vehicles or similar equipment. Instruct your child how to use the vehicle correctly and draw attention to possible sources of danger. When children are at play, situations may arise which cannot be predicted by the manufacturer and for which he cannot be held responsible. Before use, always check all screws and plug-in connections as well as respective safety devices fit correctly. Lubricate the bearing sleeves of the wheels and the handlebars with a few drops of oil every two or three months. Due to the nature of materials used in pneumatic tires on KETTLER toys, it is not recommended for the product to be left in any one place for too long where solvents or other chemicals, i. This may result in a chemical reaction, which could cause the tires to mark the surface such as a vinyl flooring. If in doubt put something underneath the wheels to cover the floor The toy vehicle must be assembled carefully by an adult person. [. . . ] When ordering spare parts, always state the full article number, spare-part number, the quantity required and the inspection number stamped on the back or the serial number of the product. Important: spare part prices do not include fastening material; if fastening material (bolts, nuts, washers etc. ) is required, this should be clearly stated on the order by adding the words , , with fastening material". Please address all warranty questions to KETTLER headquarters at the following address: For parts or service ONLY call 1-866-804-0440 or send e-mail to: parts@kettlerusa. [. . . ]