User manual KETTLER SKIDDY

[. . . ] Read these instructions carefully before assembling the scooter or using it for the first time. They contain important information for your safety and for the correct use and maintenance of the KETTLER product. Keep the instructions in a safe place for information or for ordering spare parts. [. . . ] If any parts require replacement, use only original spares manufactured by KETTLER. The product complies fully with the appropriate safety regulations (European Standard EN 71, CE) and has been passed for use by TÜV-GS. Incorrect repairs or alterations (removal of original parts or addition of other parts etc. Ensure that the toy vehicle is not used until it has been properly assembled and checked by an adult person. For safety reasons, it should never be used close to slopes, busy roads, railway crossings, rivers, ponds etc. Please bear in mind that there is always a danger of children injuring themselves whilst using swings, climbing frames, toy vehicles or similar equipment. Instruct your child how to use the vehicle correctly and draw attention to possible sources of danger. When children are at play, situations may arise which cannot be predicted by the manufacturer and for which he cannot be held responsible. Although dangerous situations are unlikely to occur if the toy is used correctly, children at play should, if possible, be supervised. Before use, always check all screws and plug-in connections as well as respective safety devices fit correctly. Lubricate the bearing sleeves of the wheels and the handlebars with a few drops of oil every two or three months. assemble the vehicle in the exact sequence shown by the letters in the diagrams. This is essential for the safe function and use of the scooter Please note that there is always a danger of injury when working with tools or doing manual work. Ensure that your working area is free of possible sources of danger, for example don't leave any tools lying around. [. . . ] Important: spare part prices do not include fastening material; if fastening material (bolts, nuts, washers etc. ) is required, this schould be clearly stated on the order by adding the words , , with fastening material". GB The grips can be pushed onto the handleb ars more easily if they are first soaked in warm water. [. . . ]