User manual KETTLER RACER GT

[. . . ] If the equipment is in regular use, check all its components thoroughly every 1 -2 months. This applies especially to the securing bolts for saddle and handelbars. To ensure that the safety level is kept to the highest possible standard, determined by its construction, this product should be serviced regulary (once a year) by specialist retailers. [. . . ] After a prolonged period of disuse) the rust should be removed using sandpaper or steel wool. Please ensure that no part of the machine comes in contact with liquids (drinks, perspiration etc. The machine is designed for use by adults and children should not be allowed to play with it. Children at play behave unpredictably and dangerous situations may occur for which the manufacturer cannot be held liable. If, in spite of this, children are allowed to use the equipment, ensure that they are instructed in its proper use and supervised accordingly. The exercise cycle complies with the DIN EN 957 - 1/- 5/-10, class HC. A slight production of noise at the bearing of the centrifugal mass is due to the construction and has no negative effect upon operation. Possibly occurring noise during reverse pedalling result from engineering and are absolutely safe. Ensure that such materials are not allowed to pollute the environment. After your training by all means turn the turning handle for brake adjustment back to zero position in order to avoid heat influences on brake linings and disk flywheel. Before use, always check all screws and plug-in connections as well as respective safety devices fit correctly. The brake linings should also be checked at regular intervals and adjusted as necessary. all electric appliances emit electromagnetic radiation when in operation. Mobile telephones) directly next to the cockpit or the electronic controlsystem as otherwise values displayed might be distorted (e. Ensure that you have received all the parts required (see check list) and that they are undamaged. Should you have any cause for complaint, please contact your KETTLER dealer. Before assembling the equipment, study the drawings carefully and carry out the operations in the order shown by the diagrams. If in doubt call upon the help of a second person, if possible technically talented. [. . . ] Please keep original packaging of this article, so that it may be used for transport at a later date, if necessary. When ordering spare parts, always state the full article number, spare partnumber, the quantity required and the S/N of the product. Important: spare part prices do not include fastening material; if fastening material (bolts, nuts, washers etc. [. . . ]