User manual KETTLER MATCH 5.0

[. . . ] All KETTLER products are designed in accordance with the latest safety regulations and undergo a constant process of quality control during manufacturing. The knowledge gained in this process is used to constantly improve and develop our products. In order to offer our customers the very best in product quality, we reserve the right to make technical changes at any time. [. . . ] When folded up, the table-tennis table presents a large surface to the wind. The table-tennis table may be pushed only into the transport position because there is otherwise a danger of injury. N Do not use the table-tennis table until it has been fully and corn For practising without a partner, the table halves can be folded N Ensure that table-tennis tables which are not weatherproof are N For more information on the sport of table-tennis, you are re- Keep them well away from direct sources of heat. Should the surface become warped, lay the table on a level surface for a few days. N Do not cover it with plastic foil, under which condensation may N Do not use corrosive or abrasive materials to clean the equip- Ensure that such materials are not allowed to pollute the environment. Its useful life please dispose of this article correctly and safely (local refuse sites). N The equipment must be assembled with due care by two adult n Ensure that you have received all the parts required (see check Should you have any cause Tighten the locknuts by hand until resistance is felt, then use spanner to finally tighten nuts completely against resistance (locking device). Attention: once locknuts have been unscrewed they no longer function correctly (the locking device is destroyed), and must be replaced. N For technical reasons, we reserve the right to carry out prelim- N Before assembling the equipment, study the drawings carefully And carry out the operations in the order shown by the diagrams. N Please note that there is always a danger of injury when work- Ing with tools or doing manual work. N Ensure that your working area is free of possible sources of Danger, for example don't leave any tools lying around. Always dispose packaging material in such a way that it may not cause any danger. There is always a risk of suffocation if children play with plastic bags!N The fastening material required for each assembly step is N Please keep original packaging of this article, so that it may be Use the fastening material exactly as instructed. [. . . ] Ask another person to attach the push bar and the support-frame brace to the last connecting bar. Now remove the temporary bar from the other side and carry out steps 4­7 for the second half of the table. Press the left-hand tip lock and turn the locking toggle into position. [. . . ]