User manual KETTLER KOMBI SET

[. . . ] The manufacturer cannot be held liable for damage or injury caused by improper use of the equipment. This unit has been designed in accordance with the latest standards of safety. Any features which may have been a possible cause of injury have been avoided or made as safe as possible. Removal or replacement of original parts) may endanger the safety of the user. [. . . ] Damaged components may endanger your safety or reduce the lifetime of the equipment. For this reason, worn or damaged parts should be replaced immediately and the equipment taken out of use until this has been done. If the equipment is in regular use, check all its components thoroughly every 1 ­ 2 months. This applies especially to the securing bolts for saddle and handelbar. To ensure that the safety level is kept to the highest possible standard, determined by its construction, this product should be serviced regulary (once a year) by specialist retailers. Instruct persons using the equipment (in particular children) on possible sources of danger during exercising. It should be connected only to a safety socket with a single 10-A fuse. Before commissioning the appliance pay attention to the fact that the correct plug-in power supply unit (observe marking) has been connected properly. Important: Do not under any circumstances carry out electrical repairs or alterations yourself. Always dispose packaging material in such a way that it may not cause any danger. There is always a risk of suffocation if children play with plastic bags!The fastening material required for each assembly step is shown in the diagram inset. Use the fastening material exactly as Bolt all the parts together loosely at first, and check that they have been assembled correctly. Tighten the locknuts by hand until resistance is felt, then use spanner to finally tighten nuts completely against resistance (locking device). Attention: once locknuts have been unscrewed they no longer function correctly (the locking device is destroyed), and must be replaced. For technical reasons, we reserve the right to carry out preliminary assembly work (e. Please keep original packaging of this article, so that it may be used for transport at a later date, if necessary. When ordering spare parts, always state the full article number, spare-partnumber, the quantity required and the S/N of the product (see spare parts drawing). [. . . ] When ordering spare parts, always state the full article number, spare-partnumber, the quantity required and the S/N of the product (see spare parts drawing). Important: spare part prices do not include fastening material; if fastening material (bolts, nuts, washers etc. ) is required, this should be clearly stated on the order by adding the words , , with fastening material". At the end of its useful life please dispose of this article correctly and safely (local refuse sites). [. . . ]