User manual KETTLER KADETT

[. . . ] Study these instructions carefully before assembling and ucing the equipment. The lnstructions contain important information for your safety and for the use and maintenance of the rowing machine. Keep the instructions in a safe place for your own information, for maintenance work and ordering spare parts. [. . . ] It is not recommended to use or store the apparatus in a damp Room as this may cause it to rust. Please ensure that no part of the machine comes in contact with liquids (drinks, perspiration etc. Before beginning exercising or after a period of disuse, it is recommended to activate the absorbers by several pumping movements. Do not use corrosive or abrasive materials to clean the equip- Ensure that such materials are not allowed to pollute the environment. The product is designed for use by adults and children should Not be allowed to play with it. Children at play behave unpredictably and dangerous situations may occur for which the manufacturer cannot be held liable. If, in spite of this, children are allowed to use the equipment, ensure that they are instructed in its proper use and supervised accordingly. A few drops of viscous oil should be applied to the bearing Before use, always check all screws and plug-in connections as Well as respective safety devices fit correctly. Please avoid contact and do not touch the shock absorbers after training. Ensure that you have received all the parts required (see check The equipment must be assembled with due care by an adult Should you have any cause for complaint, please contact your KETTLER dealer. Before assembling the equipment, study the drawings carefully If in doubt call upon the help of a second person, if possible technically talented. The fastening material required for each assembly step is shown And carry out the operations in the order shown by the diagrams. Please note that there is always a danger of injury when work- Use the fastening material exactly as instructed. Bolt all the parts together loosely at first, and check that they Ing with tools or doing manual work. [. . . ] When inserting the batteries pay attention to the designation Should there be any misoperation after switching on the com- Puter again, shortly disconnect the batteries once again and reinsert them. Please do your bit for the environment and return your batteries to the trade or to the local authority pick-up point so that the collected batteries can be properly disposed of or recycled in an environment-friendly way. A weak or an extinguished computer display makes a battery En cas de réclamation, merci de toujours indiquer le numéro de contrôle qui figure à l'arrière de la notice de montage. [. . . ]