User manual KETTLER FAVORIT

[. . . ] for Your Safety The rowing machine should be used only for its intended purpose, i. The manufacturer cannot be held liable for damage or injury caused by improper use of the equipment. the rowing machine has been designed in accordance with the latest standards of safety. Any features which may have been a possible cause of injury have been avoided or made as safe as possible. [. . . ] All bearings are pre-lubricated (further lubrication is not required) and require little maintenance. A few drops of viscous oil should be applied to the bearing sleeves of the hydraulic absorbers and the rowing levers. After a longer period of disuse, the hydraulic absorbers may not achieve their best performance at once. Before beginning exercising or after a period of disuse, it is recommended to activate the absorbers by several pumping movements. Ensure that such materials are not allowed to pollute the environment. Before use, always check all screws and plug-in connections as well as respective safety devices fit correctly. Please avoid contact and do not touch the shock absorbers after training. Ensure that you have received all the parts required (see check list) and that they are undamaged. Should you have any cause for complaint, please contact your KETTLER dealer. Before assembling the equipment, study the drawings carefully and carry out the operations in the order shown by the diagrams. Please note that there is always a danger of injury when working with tools or doing manual work. Ensure that your working area is free of possible sources of danger, for example don't leave any tools lying around. Always dispose packaging material in such a way that it may not cause any danger. There is always a risk of suffocation if children play with plastic bags!If in doubt call upon the help of a second person, if possible technically talented. The fastening material required for each assembly step is shown in the diagram inset. Bolt all the parts together loosely at first, and check that they have been assembled correctly. Tighten the locknuts by hand until resistance is felt, then use spanner to finally tighten nuts completely against resistance (locking device). [. . . ] ) is required, this should be clearly stated on the order by adding the words , , with fastening material". If the computer is too faint to read or disappears completel, the batteries must be changed. They are replaced as follows: Remove the lid of the battery compartment and replace the batteries with 2 fresh ones of type AA 1, 5 V. ensure that the batteries are inserted as indicated in the battery compartment. [. . . ]