User manual KETTLER CTR2

[. . . ] Please read these instructions carefully prior to carrying out assembly and using for the first time. They contain information which is important for your safety as well as for the use and maintenance of the appliance. [. . . ] Do not use corrosive or abrasive materials to clean the equip- It is not recommended to use or store the apparatus in a damp Ensure that such materials are not allowed to pollute the environment. Please ensure that no part of the machine comes in contact with liquids (drinks, perspiration etc. The machine is designed for use by adults and children should Not be allowed to play with it. Children at play behave unpredictably and dangerous situations may occur for which the manufacturer cannot be held liable. If, in spite of this, children are allowed to use the equipment, ensure that they are instructed in its proper use and supervised accordingly. The crosstrainer complies with the DIN EN 957 - 1/9, class Before use, always check all screws and plug-in connections as Well as respective safety devices fit correctly. Mobile telephones) directly next to the cockpit or the electronic controlsystem as otherwise values displayed might be distorted (e. Ensure that you have received all the parts required (see check The fastening material required for each assembly step is sho- Should you have any cause for complaint, please contact your KETTLER dealer. Before assembling the equipment, study the drawings carefully Use the fastening material exactly as instructed. Bolt all the parts together loosely at first, and check that they And carry out the operations in the order shown by the diagrams. The equipment must be assembled with due care by an adult If in doubt call upon the help of a second person, if possible technically talented. Please note that there is always a danger of injury when wor- King with tools or doing manual work. Ensure that your working area is free of possible sources of Tighten the locknuts by hand until resistance is felt, then use spanner to finally tighten nuts completely against resistance (locking device). Attention: once locknuts have been unscrewed they no longer function correctly (the locking device is destroyed), and must be replaced. [. . . ] When ordering spare parts, always state the full article number, spare-partnumber, the quantity required and the S/N of the product. Only use with original power unit as supplied, or with original KETTLER Spare parts order Pedido de recambios CTR2 [. . . ]