User manual KETTLER CTR1

[. . . ] For Your Safety ■ The crosstrainer should be used only for its intended purpose, i. –  Any other use of the equipment is prohibited and may be dangerous. The manufacturer cannot be held liable for damage or injury caused by improper use of the equipment. [. . . ] ■ In case of enquiry , please contact your KETTLER dealer. Handling the equipment ■ Before using the equipment for exercise, check carefully to ensure that it has been correctly assembled. –  Before beginning your first training session, familiarize yourself thoroughly with all the functions and settings of the unit. –  It is not recommended to use or store the apparatus in a damp room as this may cause it to rust. –  The machine is designed for use by adults and children should not be allowed to play with it. Children at play behave unpredictably and dangerous situations may occur for which the manufacturer cannot be held liable. If, in spite of this, children are allowed to use the equipment, ensure that they are instructed in its proper use and supervised accordingly. –  The crosstrainer complies with the DIN EN 957 - 1/9, class HA. –  A slight production of noise at the bearing of the centrifugal mass is due to the construction and has no negative effect upon operation. Possibly occurring noise during reverse pedalling result from engineering and are absolutely safe. –  Do not use corrosive or abrasive materials to clean the equipment. Ensure that such materials are not allowed to pollute the environment. –  Please ensure that liquids or perspiration never enter the machine or the electronics. –  Before use, always check all screws and plug-in connections as well as respective safety devices fit correctly. ■ All electric appliances emit electromagnetic radiation when in operation. Mobile telephones) directly next to the cockpit or the electronic controlsystem as otherwise values displayed might be distorted (e. Pulse measurement Instructions for Assembly ■ Ensure that you have received all the parts required (see check list) and that they are undamaged. Should you have any cause for complaint, please contact your KETTLER dealer. [. . . ] –  For technical reasons, we reserve the right to carry out preliminary assembly work (e. –  Please keep original packaging of this article, so that it may be used for transport at a later date, if necessary. List of spare parts When ordering spare parts, always state the full article number, spare-part number, the quantity required and the inspection number stamped on the back. [. . . ]