User manual KETTLER ASTRO

[. . . ] For Your Safety: Only use the Cross-Trainer for its intended purpose, i. e. The manufacturer cannot be made liable for damage caused by a use that does not correspond with the intended purpose. You train with an equipment that has been designed in accordance with the latest state of the art regarding safety. Possible danger spots that may cause injuries have been avoided and safeguarded as well as possible. [. . . ] The Cross-Trainer is designed for use by adults and children should not be allowed to play with it. Children at play behave unpredictably and dangerous situations may occur for which the manufacturer cannot be held liable. If, in spite of this, children are allowed to use the equipment, ensure that they are instructed in its proper use and supervised accordingly. On principle, the equipment does not require any special maintenance. All bearings are pre-lubricated (further lubrication is not required) and require little maintenance. Ensure that such materials are not allowed to pollute the environment. The exercise cycle has a brake system, which require little maintenance and does not require any adjusting work. To operate correctly, the pulse function requires a minimum voltage of 2, 7 volts. Please ensure that liquids or perspiration never enter the machine or the electronics. Before use, always check all screws and plug-in connections as well as respective safety devices fit correctly. Please keep original packaging of this article, so that it may be used for transport at a later date, if necessary. Instructions for Assembly Ensure that you have received all the parts required ( see check list ) and that they are undamaged. Should you have any cause for complaint, please contact your KETTLER dealer. Before assembling the equipment, study the drawings carefully and carry out the operations in the order shown by the diagrams. If in doubt call upon the help of a second person, if possible technically talented. Please note that there is always a danger of injury when working with tools or doing manual work. Ensure that your working area is free of possible sources of danger, for example don't leave any tools lying around. Always dispose packaging material in such a way that it may not cause any danger. There is always a risk of suffocation if children play with plastic bags! The fastening material required for each assembly step is shown in the diagram inset. Bolt all the parts together loosely at first, and check that they have been assembled correctly. [. . . ] mit Lagerbuchsen und Achse) Lagerbuchse Achse ø11, 95x350mm für Lageraufnahme Lageraufnahme für Armhebel Lagerschale für Armhebel Verstelleinheit (kpl. ) Kugellager 6001-ZZ Bolzen 20x133 m. Linksgewinde Computer ST 2302-8 Verlängerungskabel Pedalarm mit Kugellagern 6203-ZZ Kugellager 6203-ZZ Armhebel links (kpl. mit Griffschlauch, Stopfen für ø28mm, Lagerschale, Lageraufnahme und Kugellagern 6200-ZZ und 6001-ZZ) Armhebel rechts (kpl. mit Griffschlauch, Stopfen für ø28mm, Lagerschale, Lageraufnahme und Kugellagern 6200-ZZ und 6001-ZZ) Griffschlauch 680mm Stopfen für ø28mm Distanzhülse für Pedalarm Lenkerrohrabdeckung Fußtritt (rechts) Fußtritt (links) Dichtscheibe ø22x9, 2x1mm mit Beschichtung Abdeckkappe Handpulsaufnehmer WP 1007-5C Bolzen 20x133 m. [. . . ]