User manual KENWOOD VRS-5100

[. . . ] AUDIO VIDEO SURROUND RECEIVER VRS-5100 INSTRUCTION MANUAL KENWOOD CORPORATION About the supplied remote control Compared to standard remote controls, the remote control supplied with this receiver has several operation modes. These modes enable the remote control to control other audio/video components. In order to effectively use the remote control it is important to read the operating instructions and obtain a proper understanding of the remote control and how to switch its operation modes (etc. ). Using the remote control without completely understanding its design and how to switch the operation modes may result in incorrect operations. B60-5473-18 01 C (E, X, Y) 0312 *5473/01-07/EN 1 04. 4. 20, 1:29 PM Before applying the power Units are designed for operation as follows. [. . . ] Radio stations can be classified into RDS (Radio Data System) stations and other stations. To listen to or store RDS stations in the preset memory see “Using RDS (Radio Data System)”. • The RDS function is only for the Europe. INPUT SELECTOR Tuning (non-RDS) radio stations INPUT SELECTOR MULTI CONTROL∞¥5 Recording a music source 1 Use the INPUT SELECTOR knob or Input Selector keys to select the source (other than “VIDEO1”) you want to record. 3 Start playback, then start recording. BAND BAND AUTO Recording video 1 Use the INPUT SELECTOR knob or Input Selector keys to select the video source (other than “VIDEO1”) you want to record. º TUNING 1¥¡ TUNER 1 Use the INPUT SELECTOR knob or TUNER key to select the tuner. 2 Use the BAND key to select the desired broadcast band. Each press switches the band as follows: 1 FM 2 AM “AM” or “FM” indicator appears in the display DIGITAL RDS PTY ST. TUNED AUTO FM/AM kHz MHz 3 Use the AUTO key to select the desired tuning method. Each press switches the tuning method as follows: 1 AUTO lit (auto tuning) 2 AUTO not lit (manual tuning) “AUTO” indicator lights up in the display. DOLBY DEX NEO:6 DOLBY PLII DTS -ES AAC DISCRETE MATRIX 6. 1 ACTIVE EQ. TUNED AUTO FM/AM kHz MHz L LFE C R SW LS S BS RS • Normally, set to “AUTO” (auto tuning). If the radio waves are weak and there is a lot of interference, switch to manual tuning. (With manual tuning, stereo broadcasts will be received in monaural. ) 4 Use the MULTI CONTROL ∞/ 5 keys or TUNING 1 / ¡ keys to select the station. “ST. ” lights when a broadcast is being received in stereo. DOLBY DEX NEO:6 DOLBY PLII DTS -ES AAC DISCRETE MATRIX 6. 1 ACTIVE EQ. TUNED AUTO FM/AM kHz MHz L LFE C R SW LS S BS RS “TUNED” is displayed when a station is received. Manual tuning : Press the MULTI CONTROL ∞¥5 keys or TUNING 1¥¡ keys to select the desired station. 19 EN 名称未設定-12 19 04. 3. 25, 5:16 PM Listening to radio broadcasts Using RDS (Radio Data System) (for the Europe only) RDS is a system that transmits useful information (in the form of digital data) for FM broadcasts along with the broadcast signal. Tuners and receivers designed for RDS reception can extract the information from the broadcast signal for use with various functions, such as automatic display of the station name. Presetting radio stations (AUTO PRESET) (except for the Europe) This function automatically stores up to 40 FM stations in the preset memory. INPUT SELECTOR RDS functions: PTY (Program TYpe Identification) Search ™ Automatically tunes to a station that is currently broadcasting the specified program type (genre). PS (Program Service Name) Display Automatically displays the station name transmitted by the RDS station. RDS AUTO MEMORY function ™ Automatically selects and stores up to 40 RDS stations in the preset memory. If fewer than 40 RDS stations have been stored in the preset memory, regular FM stations will be stored in the remaining places. BAND SETUP BAND TUNER Radio Text function Displays the radio text data transmitted by some RDS stations when you press the RDS Disp. The “RDS” indicator lights up when an RDS broadcast (signal) is received. DOLBY DEX NEO:6 DOLBY PLII DTS -ES AAC DISCRETE MATRIX 6. 1 ACTIVE EQ. TUNED AUTO FM/AM kHz MHz 1 Use the INPUT SELECTOR knob or TUNER key to select the tuner. L LFE C R SW LS S BS RS 2 Use the BAND key to set the broadcast band to “FM”. 3 Press and hold the SETUP key for more than 2 seconds. DOLBY DEX NEO:6 DOLBY PLII DTS -ES AAC DISCRETE MATRIX 6. 1 ACTIVE EQ. TUNED AUTO FM/AM kHz MHz L LFE C R SW Note Some functions and function names may differ for certain countries and areas. LS S BS RS Before using a function utilizing the RDS, be sure to perform the RDS Auto Memory operation by referring to the description in “Presetting RDS stations (RDS AUTO MEMORY)”. ™ DOLBY DEX NEO:6 DOLBY PLII DTS -ES AAC DISCRETE MATRIX 6. 1 ACTIVE EQ. DSP TS MUTE DIGITAL RDS PTY ST. TUNED AUTO FM/AM kHz MHz L LFE C R SW LS S BS RS • After a few minutes, up to 40 FM stations are preset in order from channel “01”. • Stations already stored in the preset memory may be replaced by new FM stations. Presetting radio stations manually The RDS auto memory function assigns preset numbers to RDS stations starting from preset number “1”. Therefore, be sure to execute the RDS auto memory function before using the following operations to manually store AM stations and other FM stations, and RDS stations. [. . . ] 1V / 1 kΩ Tone control BASS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±10 dB (at 100 Hz) TREBLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±10 dB (at 10 kHz) VIDEO section VIDEO inputs / outputs VIDEO (composite) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Military only) S-VIDEO (luminance signal) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]