User manual KENWOOD TM-V71A

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual KENWOOD TM-V71A. We hope that this KENWOOD TM-V71A user guide will be useful to you.


KENWOOD TM-V71A : Download the complete user guide (4454 Ko)

You may also download the following manuals related to this product:

   KENWOOD TM-V71A (3652 ko)
   KENWOOD TM-V71A (5852 ko)
   KENWOOD TM-V71A (6122 ko)
   KENWOOD TM-V71A (5875 ko)
   KENWOOD TM-V71A (5859 ko)
   KENWOOD TM-V71A (3041 ko)
   KENWOOD TM-V71A (5852 ko)
   KENWOOD TM-V71A (2775 ko)

Manual abstract: user guide KENWOOD TM-V71A

Detailed instructions for use are in the User's Guide.

[. . . ] A maximum of 280 memory channels are available, 140 each for VHF and UHF. “Visual Scan” graphically and simultaneously shows the conditions of up to 147 frequency channels. The Dual Band RX feature allows two frequencies to be simultaneously received. A large, dot matrix LCD with alpha-numeric display capability is positive and negative reversible. [. . . ] Visual Scan graphically and simultaneously shows how all frequencies in the selected range are busy. You will see up to 14 segments, for each channel, that represent 7 S-meter levels (2 segments per level). You determine the scan range by selecting the center frequency and the number of channels. The default number of channels is 49. S-meter level 7 6 5 4 3 2 1 ■ Selecting the Number of Channels 1 Press [MNU] to enter Menu mode. 2 (Front Panel). CALL 1 2 3 4 5 VOL SQL 2 6 7 8 CALL 3 Press [s], then select Item No. 1 (Visual Scan). Mode 2 (49 ch) 9 VOL SQL 10 11 12 13 14 15 2 1 4 Press [SET] to select 25, 49, 73, or 147. Cursor Frequency channel Move the cursor to this position to receive this signal. • The default is 49. 5 Press [MNU] to exit Menu mode. Mode 4 (147 ch) 7 6 5 4 3 2 1 16 17 18 19 20 21 41 ■ Using Visual Scan 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 Note: ◆ ◆ ◆ ◆ ◆ 1 Select the desired band. 2 Turn the Tuning control, or press Mic [UP]/[DWN], to select the operating frequency. • This frequency will also be used as the center frequency. 3 Press [F], [VISUAL] to start Visual Scan. Press [PAUSE] again to resume. ◆ If you start Visual Scan in Memory Recall mode, the memory channel frequencies will be scanned. If you start Visual Scan after recalling the Call channel, the call channel frequency will be used as the center frequency. If you start Visual Scan in one of the following conditions, you cannot receive in the current operating frequency. 2 Turn the Tuning control, or press Mic [UP]/[DWN], to display the desired lower limit. 4 Turn the Tuning control, or press Mic [UP]/[DWN], to select channel L1, L2, or L3. 6 Turn the Tuning control, or press Mic [UP]/[DWN], to display the desired upper limit. 8 Turn the Tuning control, or press Mic [UP]/[DWN], to select channel U1, U2, or U3. • If you have selected for example L1 in step 4, select U1. 9 Press [MR]. • The upper limit is stored in the channel. 10 To confirm the stored scan limits, press [MR], then select the L and U channels. Note: ◆ ◆ ◆ 13 14 15 16 17 18 19 20 21 5 Press [MR]. • The lower limit is stored in the channel. The lower limit must be lower in frequency than the upper limit. The lower and upper limits must be selected on the same band. 46 ■ Using Program Scan 1 Select a frequency equal to or between the programmed scan limits. 2 Press [VFO] (1 s). • • The 1 MHz decimal blinks while scanning is in progress. Scan starts at the frequency currently displayed. MHz SCAN MHz Scan allows you to scan a 1 MHz segment of the band. For example, if the current frequency is 438. 400 MHz, then MHz Scan would scan from 438. 000 MHz to 438. 975 MHz. 4 To quit MHz Scan, press [MHz] again. • If the current frequency is within the program scan range when stopping MHz Scan, Program Scan resumes. Otherwise, VFO Scan resumes. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 3 To reverse the scan direction, turn the Tuning control or press Mic [UP]/[DWN]. • • Upward scan: Turn the Tuning control clockwise or press Mic [UP]. Downward scan: Turn the Tuning control counterclockwise or press Mic [DWN]. 4 To quit Program Scan, press [BAND SEL] for the band being scanned or [VFO]. • Note: ◆ ◆ When scanning the TX band, you can also press Mic [PTT] to quit Scan. The squelch must be closed for Scan to function. If the frequency step of the current VFO frequency differs from the frequency step of the programmed frequencies, you cannot use Program Scan. [. . . ] This is not a defect. VHF/UHF mode: (UHF receive frequency – 45. 05 MHz) x 2 – (VHF receive frequency + 38. 85 MHz) x 4 = 38. 85 MHz or 45. 05 MHz (UHF receive frequency – 45. 05 MHz) – (VHF receive frequency + 38. 85 MHz) x 2 = 38. 85 MHz (VHF receive frequency on the UHF band + 45. 05 MHz) x 5 – (VHF receive frequency on the VHF band + 38. 85 MHz) x 5 = 38. 85 MHz or 45. 05 MHz (VHF receive frequency on the UHF band + 45. 05 MHz) x 4 – (VHF receive frequency on the VHF band + 38. 85 MHz) x 4 = 38. 85 MHz (VHF receive frequency on the VHF band + 38. 85 MHz) – (VHF receive frequency on the UHF band + 45. 05 MHz) x 0. 75 = 38. 85 MHz (UHF receive frequency on the VHF band – 38. 85 MHz) x 3 – (UHF receive frequency on the UHF band – 45. 05 MHz) x 3 = 38. 85 MHz or 45. 05 MHz (UHF receive frequency on the VHF band – 38. 85 MHz) x 4 – (UHF receive frequency on the UHF band – 45. 05 MHz) x 4 = 38. 85 MHz or 45. 05 MHz 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 UHF/UHF mode: Problem The transceiver will not power up after connecting a 13. 8 V DC power supply and pressing the (POWER) switch. Nothing appears on the display. Probable Cause 1 The power cable was connected backwards. 2 One or more of the power cable fuses are open. Corrective Action 1 Connect the supplied DC power cable correctly: Red ➞ ( + ); Black ➞ ( – ). After inspecting and correcting any problems, install a new fuse(s) with the same ratings. Page Ref. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE KENWOOD TM-V71A




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual KENWOOD TM-V71A will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.