User manual KENWOOD SJ908A

[. . . ] Note: For non-rewireable plugs the fuse cover MUST be refitted when replacing the fuse. If the fuse cover is lost then the plug must not be used until a replacement can be obtained. The correct fuse cover is identified by colour and a replacement may be obtained from your Kenwood Authorised Repairer (see Service). [. . . ] This kettle is not intended for use by young children or infirm persons without supervision. Young children should be supervised to ensure they do not play with the appliance. This kettle is for domestic use only. know your Kenwood jug kettle lid scale filter water level gauges on/off switch with neon 360° powerbase cord winder handle G G boil-dry protection If you switch on with too little water, your kettle will cut out automatically. When it has cooled down, the switch will reset itself. G care and cleaning Before cleaning, unplug your kettle and let it cool down. G to use your jug kettle 1 Fill the kettle through the lid. G Always use the filter and never overfill - boiling water may splash out. To re-boil, wait a few seconds - the on/off switch needs time to reset. G If you experience problems with your kettle switching on and off during use or switching off before boiling, check that the flat element is free from scale - see "descaling". If descaling does not solve the problem contact Kenwood customer care. G Your kettle is fitted with a scale filter to hold back limescale particles. G If you find drops of water under your kettle, don't worry - it is just condensation. G G the outside and powerbase Wipe with a damp cloth, then dry. Do not use abrasives - they will scratch the metal and plastic surfaces. Even though your kettle comes with a scale filter, you still need to clean the inside (and the filter) regularly. G G G G G the scale filter 1 Remove the lid. 3 either rinse under the tap or use a soft brush or when descaling your kettle, drop the filter in too. 4 Replace the filter by locating the front of the filter into the spout area and then clip into place . G G G descaling Regular descaling of the flat element will improve the performance of your kettle. If the kettle is not descaled regularly the build up of limescale may result in the following: G problems may be experienced with the kettle switching on and off during use or switching off before boiling. G When limescale starts to build up on the heating element, buy a suitable descaler and descale your kettle. [. . . ] Don't stop to remove clothing. If the cord is damaged it must, for safety reasons, be replaced by KENWOOD or an authorised KENWOOD repairer. UK If you need help with: using your kettle servicing or repairs (in or out of guarantee) call Kenwood Customer Care on 023 9239 2333. Have your model number ready - it is located on the underside of your kettle. [. . . ]