User manual KENWOOD KVT-739DVD

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual KENWOOD KVT-739DVD. We hope that this KENWOOD KVT-739DVD user guide will be useful to you.


KENWOOD KVT-739DVD : Download the complete user guide (1092 Ko)

You may also download the following manuals related to this product:

   KENWOOD KVT-739DVD (580 ko)
   KENWOOD KVT-739DVD (581 ko)
   KENWOOD KVT-739DVD (701 ko)

Manual abstract: user guide KENWOOD KVT-739DVD

Detailed instructions for use are in the User's Guide.

[. . . ] ¤ • If the power is not turned ON (or it is ON, but will be OFF immediately), the speaker wire may have a short-circuit or touched the chasis of the vehicle and the protection function may have been activated. € If your car’s ignition does not have an ACC position, connect the ignition wires to a power source that can be turned on and off with the ignition key. If you connect the ignition wire to a power source with a constant voltage supply, as with battery wires, the battery may die. [. . . ] USB device (commercially available) USB connector Ignition key switch Car fuse box ACC Ignition wire (Red) Battery wire (Yellow) Car fuse box (Main fuse) Wiring harness (Accessory 2) Accessory @ FUSE ( 5A ) Ground wire (Black) - (To car chassis) Antenna Cord The cable (Accessory 3) is fixed with a chassis using harness band (Accessory @). A + – Accessory 4 Battery Connect to the vehicle's parking brake detection switch harness using the supplied relay connector. Parking sensor wire (Light Green) PRK SW Battery wire (Yellow) FUSE ( 10A ) Ground wire (Black) - (To car chassis) A For the sake of safety, be sure to connect the parking sensor. To vehicle's reverse lamp harness Reverse sensor wire (Purple/White) To car light control switch Dimmer control wire (Orange/White) Steering remote control input (Light Blue/Yellow) To steering remote Connect to the terminal that is grounded when either the telephone rings or during conversation. To connect the Kenwood navigation system, consult your navigation manual. Depending on what antenna you are using, connect either to the control terminal of the motor antenna, or to the power terminal for the booster amplifier of the film-type antenna. When using the optional power amplifier, connect to its power control terminal. " terminal of the amplifier having the external amp control function. Mute wire (Brown) Motor antenna control wire (Blue) Power control wire (Blue/White) External amplifier control wire (Pink/Black) If no connections are made, do not let the cable come out from the tab. 9 7:15:05 PM Receiver unit Accessory @ Accessory 3 The cable (Accessory 3) is fixed with a chassis using harness band (Accessory @). receiver unit FM/AM antenna input Wiring harness (Accessory 1) REVERSE FRONT L White/Black White + ILLUMI To front left speaker REMO. CONT FRONT R Gray/Black Gray + To front right speaker MUTE REAR L Green/Black Green + To rear left speaker ANT CONT REAR R Purple/Black Purple + P. CONT If you connect the ignition wire (red) and the battery wire (yellow) to the car chassis (ground), you may cause a short circuit, that in turn may start a fire. Always connect those wires to the power source running through the fuse box. 9 7:15:07 PM System Connection Receiver unit ■ Front Preout • Audio left output (White) • Audio right output (Red) ■ Rear Preout • Audio left output (White) • Audio right output (Red) ■ Subwoofer Preout • Audio left output (White) • Audio right output (Red) ■ Audio/Visual input • Visual input (Yellow) • Audio left input (White) • Audio right input (Red) ■ Rear View Camera Input • Visual input (Yellow) ■ Audio/Visual Output • Visual output (Yellow) • Audio left output (White) • Audio right output (Red) 6 | KVT-719DVD/KVT-739DVD B54-4513-00_00_English. 5Ф) Visual Output (Yellow) Monitor/Player unit USB terminal USB terminal Receiver unit Accessory 3 Connection cable (Included in the Disc changer) Connection cable (Included in the Navigation System) Disc Changer etc. 9 7:15:10 PM Installation for Monitor/Player Unit Firewall or metal support Screw (M4X8) (commercially available) Bend the tabs of the mounting sleeve with a screwdriver or similar utensil and attach it in place. Self-tapping screw (commercially available) Metal mounting strap (commercially available) Accessory 5 Make sure that the unit is installed securely in place. [. . . ] Pull the unit all the way out with your hands, being careful not to drop it. (M5x7mm) Screws (included in audio unit package) Screws (included in audio unit package) Audio unit or others ⁄ • Do not use your own screws. 9 7:15:13 PM Installation on Toyota Car using Brackets at Holes shown by "●" or When using the bracket shown above, you cannot use screws at two holes of the right and left unit sides. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE KENWOOD KVT-739DVD




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual KENWOOD KVT-739DVD will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.