User manual KENWOOD KMD-71

[. . . ] · Make sure not to get your fingers caught between the faceplate and the unit. · Be careful not to drop the unit or subject it to strong shock. The unit may break or crack because it contains glass parts. 2CAUTION To prevent damage to the machine, take the following precautions: · Make sure to ground the unit to a negative 12V DC power supply. · Do not install the unit in a spot exposed to direct sunlight or excessive heat or humidity. [. . . ] · When the faceplate has been slid open, it might interfere with the gear lever or something else. If this happens, pay attention to safety and move the gear lever or take an appropriate action, then operate the unit. NOTE Fast Forwarding and Reversing Disc Play Fast Forwarding Disc Play: Hold down on the ¢ button. Release your finger to play the disc at the point. NOTE · The sound will be temporarily muted whilst the faceplate is moving. · The only buttons that will work during the eject state are the ¡(EJECT), SRC, TI, and ATT buttons, as well as the volume control button. Playing Other Disc mode This function permits the connection of optional players and the playing of discs other than the loaded MD (in the current unit). You cannot use reverse play between tracks depending on the model being connected. Instead, the reverse play function is cancelled when it reaches the beginning of a track, at which point normal play automatically resumes. Playing Discs: Press the SRC button repeatedly to select the external disc control mode. The disc will start playing. NOTE The external disc control mode will differ, depending on the unit that is connected. Mode Display Examples · "CD" . . . when a CD player is connected · "DISC" . . . when a disc changer is connected · "DISC-1" , "DISC-2" . . . when two disc changers are connected -- 23 -- MD/External disc control features English Track Search Search forwards or backwards through the tracks on the disc until you reach the one that you want to listen to. Play starts at the beginning of the displayed disc. NOTE Making a Reverse Track Search: Press the 4 button to display the desired track number. Press once to search back to the beginning of the current track, twice to search back to the beginning of the previous track, and so forth. Play starts at the beginning of the displayed track number. NOTE (For disc changers) Pressing the 4 button whilst listening to track 1 only searches back to the beginning of that track. The reverse search is not "recycled" to the last track on the disc. To scroll automatically: 1 Press the DISP button to display the disc title or the track title. The titles will be displayed in one scrolling display. NOTE Magazine Random Play (Function of disc changers) Play the tracks on all the discs in the disc changer in random order. 1 Press the M. RDM button to switch the magazine random play function on and off. "M-Random ON" is displayed when magazine random play is turned on. The display of the disc and track numbers change continuously as the next track is being selected. The selected disc/track number blinks in the display as it is being played. NOTE When the disc or track to be played changes, the title is displayed in one scrolling display. 2 Press the DISP or CLK button to display the disc title or track title at the upper part of the display. 3 Holding down the DISP button for one second or more results in one scrolling display of the titles. NOTE Please see the menu settings (page 38) about switching between manual scrolling and automatic scrolling. This function is not available with the following models: KDC-C200/C300/C400/C301/C401 2 To change the track being heard, press the ¢ button. Another disc/track is selected and played. NOTE · Magazine random play is cancelled when you eject the disc. · The time needed for random selection depends on the number of discs loaded in the disc magazine. Text / Title Scroll This function permits the text to be scrolled and the entire text to be displayed. The scrolling method differs depending on the setting of scrolling in the menu. To scroll manually: -- 27 -- MD/External disc control features Presetting Disc Names(DNPS) (Function of disc changers) Store the names of discs to be displayed when played. 1 Play the disc whose name you want to preset. NOTE · This function is not available for disc changers that do not feature the Disc Name Preset function. · This procedure is not to be used to store the disc and track titles for MDs that you record. · When the display mode selection is full-screen display and disc title or track title is displayed at the upper part of the vertical division screen, the disc name preset function cannot be used. A press of the 38 button exits the disc name preset mode. [. . . ] The antenna control cable is not connected. Radio reception is poor. The memory is erased when the ignition is turned off. The battery cable has not been connected to the proper terminal. The ignition and battery cable are incorrectly connected. The TEL mute function does not work. The TEL mute function turns on even though the TEL mute cable is not connected. The faceplate does not open or close. The TEL mute cable is not connected properly. [. . . ]