User manual KENWOOD KDC-W7041UY BROCHURE
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual KENWOOD KDC-W7041UY. We hope that this KENWOOD KDC-W7041UY user guide will be useful to you.
Manual abstract: user guide KENWOOD KDC-W7041UYBROCHURE
Detailed instructions for use are in the User's Guide.
[. . . ] CD-RECEIVER
KDC-W7541U KDC-W7541UY KDC-W7041U KDC-W7141UY
INSTRUCTION MANUAL
Declaration of Conformity with regard to the EMC Directive 2004/108/EC
Manufacturer:
Kenwood Corporation 2967-3 Ishikawa-machi, Hachioji-shi, Tokyo, 192-8525 Japan
EU Representative's:
Kenwood Electronics Europe BV Amsterdamseweg 37, 1422 AC UITHOORN, The Netherlands
© B64-4049-00/00 (EW/E2W)
Contents
Before use Basic Operation
General functions Tuner functions Disc & Audio file play functions
3 4
Audio Adjustments
Audio Control Adjusting the detail of Audio Control Audio Setup Speaker Setting Audio Preset Memory Audio Preset Recall
19
Function Control
6
/
· Read through this page first for the setting of each function.
Basic Operations of remote control 22 Appendix 23
Display Settings
About Display Type Text Display Selection Font Color Selection Disc Naming (DNPS) Auxiliary Input Display Setting
8
Accessories/ Installation Procedure 26 Connecting Wires to Terminals Installation/Removing the Unit 27 29 30 32
Music disc/Audio file Operation
Music Select Direct Music Search Direct Disc Search Basic Operation of Disc Changer (Optional)
12
Troubleshooting Guide Specifications
Tuner Operation
Station Preset Memory Preset Tuning Direct Access Tuning PTY (Program Type) Program Type preset Changing Language for PTY Function
14
Other Functions
Security Code Manual Clock Adjustment Date Adjustment AMP Control Picture downloading Demonstration mode setting Theft Deterrent Faceplate
16
· iPod is a trademark of Apple, Inc. , registered in the U. S. · The "AAC" logo is trademark of Dolby Laboratories.
2|
KDC-W7541U/KDC-W7541UY/KDC-W7041U/KDC-W7141UY
Before use
2WARNING To prevent injury or fire, take the following precautions:
· To prevent a short circuit, never put or leave any metallic objects (such as coins or metal tools) inside the unit. · If you experience problems during installation, consult your Kenwood dealer. · When you purchase optional accessories, check with your Kenwood dealer to make sure that they work with your model and in your area. [. . . ] For how to select Function Control items, refer to <Function Control> (page 6).
4 Exit Date adjustment mode
Press the [FNC] button.
When LX AMP unit connecting
3 Enter downloading mode
Press the Control knob for at least 1 second.
AMP Control
You can control the LX AMP connected to the unit.
4 Select a media
Push the Control knob towards right or left. Select a USB device ("USB") or CD-R/RW ("CD").
1 Select AMP Control item during Menu mode
Select the "AMP Control" display. For how to select Function Control items, refer to <Function Control> (page 6).
5 Enter the downloading mode
Turn the Control knob to select "YES", and then press the Control knob. "File Check!!" display blinks.
2 Enter AMP Control mode
Press the Control knob for at least 1 second.
3 Select the AMP Control item for adjustment
Push the Control knob towards up or down.
6 Select files to be downloaded
Turn the Control knob or push it towards up or down. Press the Control knob.
/
· For the details on the AMP Control item, see the Instruction manual attached to the LX AMP.
7 Start downloading
Turn the Control knob to select "YES", and then press the Control knob. When the downloading finishes, "Finished" is displayed.
4 Adjust the AMP Control item
Push the Control knob towards right or left.
5 Exit AMP Control mode
Press the [FNC] button.
/
· Picture downloading may take as long as 20 minutes.
Cancelling Downloading Press the [FNC] button.
8 Exit the downloading mode
Press the [FNC] button.
Next page 3 English | 17
Other Functions /
· Do not operate this unit while downloading to prevent data from being damaged. - Downloaded movie: 1 file - Wallpaper: 1 file · When a new wallpaper is downloaded, it is overwritten to the currently downloaded wallpaper. "DISP" > "GRAPH" of <Function Control> (page 6) · When you cannot download the pictures to this unit, there may be a problem with the CD-R/CD-RW/USB device write method. Refer to the URL http://www. kenwood. net-disp. com.
Theft Deterrent Faceplate
The faceplate of the unit can be detached and taken with you, helping to deter theft.
Removing the Faceplate
1 Press the Release button.
Drop open the faceplate.
2 Drawing the faceplate to left side pull it to
forward and remove it.
PICTURE ENGINE Picture Engine is an application software distributed from Kenwood's official website. As for the download of application, please browse "http://www. kenwood. net-disp. com/" for directions.
¤
· The faceplate is a precision piece of equipment and can be damaged by shocks or jolts. · Do not expose the faceplate (and the faceplate case) to direct sunlight or excessive heat or humidity. Also avoid places with too much dust or the possibility of water splashing.
Demonstration mode setting
Turning the demonstration mode ON/OFF.
Reattaching the Faceplate
1 Align the shaft on the unit with the depression
on the faceplate.
1 Select Demonstration item during Menu mode
Select the "DEMO Mode" display. For how to select Function Control items, refer to <Function Control> (page 6).
2 Set the Demonstration mode
Press the Control knob for at least 2 seconds. Pressing this button for 2 seconds or longer toggles the setting between "ON" and "OFF".
3 Exit Demonstration mode
Press the [FNC] button.
2 Push the faceplate in until it clicks.
The faceplate is locked in place, allowing you to use the unit.
18 |
KDC-W7541U/KDC-W7541UY/KDC-W7041U/KDC-W7141UY
Audio Adjustments
Audio Control
You can adjust following Audio Control items ; Display Range "REAR VOLUME" 0 -- 35 "SUB-W LEVEL" 15 -- +15 "NATURAL"/ Natural/User setting/Rock/ "USER"/"ROCK"/ Pops/Easy/Top 40/Jazz "POPS"/"EASY"/ (The indicator turns on "TOP40"/"JAZZ"/ according to the setting. ) Bass level* "BASS LEVEL" 8 -- +8 Middle level* "MIDDLE LEVEL" 8 -- +8 Treble level* "TREBLE LEVEL" 8 -- +8 Balance "BALANCE" Left 15 -- Right 15 Fader "FADER" Rear 15 -- Front 15 Exit Audio Control mode (Volume control mode)
* You can adjust these items in detail. (Function of KDCW7541U/W7541UY) * Source tone memory: Puts the set up value in the memory per source. (Detail Audio item is included)
Function of KDC-W7541U/W7541UY
Adjusting the detail of Audio Control
Among the Basic Audio items, you can adjust the Bass level, Middle level, and Treble level in detail. Bass level Adjustment Item Bass Center Frequency Bass Q Factor Bass Extend Middle level Adjustment Item Display Range Middle Center Frequency "MIDDLE FRQ" 0. 5/1. 0/1. 5/2. 0 kHz Middle Q Factor "MIDDLE Q FACTOR" 1. 00/2. 00 Treble level Adjustment Item Display Treble Center Frequency "TREBLE FRQ" Range 10. 0/12. 5/15. 0/17. 5 kHz Display "BASS FRQ" "BASS Q FACTOR" "BASS EXT" Range 40/50/60/70/80/100/ 120/150 Hz 1. 00/1. 25/1. 50/2. 00 OFF/ON
Adjustment Item Rear volume Subwoofer level System Q
/
· "USER": The ranges selected lastly for Bass level, Middle level, and Treble level are recalled automatically.
1 Select the Basic Audio item
Select the desired item to be set in detail from followings; · Bass level · Middle level · Treble level For how to select Basic Audio items, see <Audio Control> (page 19).
1 Select the source to adjust
For how to select source item, refer to <Power/ Source Select button> of <Basic Operation> (page 4).
2 Enter Audio Control mode
Press the [AUD] knob.
2 Enter Detail adjustment mode of Audio
Control Press the [AUD] knob for at least 1 second.
3 Select the Audio item to adjust
Press the [AUD] knob.
4 Adjust the Audio item
Turn the [AUD] knob.
3 Select the Detail Audio item to adjust
Press the [AUD] knob.
5 Exit Audio Control mode
Press any button. Press a button other than the [AUD] knob and [ATT] button.
4 Adjust the Detail Audio item
Turn the [AUD] knob.
5 Exit the Detail Audio Control mode
Press the [AUD] knob for at least 1 second.
/
· When you set the Bass Extend to ON, low frequency response is extended by 20%. · You can exit the Audio Control mode at anytime by pressing any button except for [AUD] knob and [ATT] button.
English |
19
Audio Adjustments
Audio Setup
You can set Sound system , such as follows; Adjustment Item Display Front High Pass Filter "HPF-F" Rear High Pass Filter "HPF-R" Low Pass Filter Subwoofer Phase Volume offset Loudness Dual Zone System "LPF" "SW PHASE" "VOL-OFFSET" "LOUD" "2 ZONE" Range Through/40*1/ 60*1/80/100/ 120/150/180/220*1 Hz Through/40*1/ 60*1/80/100/ 120/150/180/220*1 Hz 50*1/60/80/100*1/120/ Through Hz Reverse (180°)/ Normal (0°) 8 -- ±0 (AUX: -8-- +8) OFF/ON OFF/ON
Speaker Setting
Fine-tuning so that the System Q value is optimal when setting the speaker type as follows; Speaker type OFF For 5 & 4 in. speaker For the OEM speaker Display "OFF" "5/4inch" "6x9/6inch" "O. E. M. "
1 Enter Standby
Select the "STANDBY" display. For how to select source item, refer to <Power/ Source Select button> of <Basic Operation> (page 4).
*1 KDC-W7541U/W7541UY only.
/
· Volume offset: Sets each source's volume as a difference from the basic volume. [. . . ] "MENU" > "SWPRE" of <Function Control> (page 6) · <Subwoofer output> of <Basic Operation> (page 4) is not set to On. <Audio Setup> (page 20) · Cannot set up the subwoofer phase. <Audio Setup> (page 20) · Cannot select the output destination of the subsource in the Dual zone. <Audio Setup> (page 20) · Cannot register a security code. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE KENWOOD KDC-W7041UY
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual KENWOOD KDC-W7041UY will begin.