User manual KENWOOD KDC-610U

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual KENWOOD KDC-610U. We hope that this KENWOOD KDC-610U user guide will be useful to you.


KENWOOD KDC-610U : Download the complete user guide (642 Ko)

Manual abstract: user guide KENWOOD KDC-610U

Detailed instructions for use are in the User's Guide.

[. . . ] The illustrations of the display and panel appearing in this manual are examples used to explain more clearly how the controls are used. Therefore, what appears on the display in the illustrations may differ from what appears on the display on the actual equipment, and some of the images on the display may be inapplicable. 2 | Quick Start Guide Before use # WARNING To prevent injuries or a fire, take the following precautions: About the discs used with this unit • This unit can only play the CDs with . € The following discs cannot be used: -- A disc that is not round -- A disc with coloring on the recording surface or a disc that is dirty -- A recordable/rewritable disc that has not been finalized (For the finalization process, refer to the instruction manual that came with your disc writing software or your disc recorder. [. . . ] Do not keep Apple Lightning to 30-pin Adapter in your car to avoid the damage by heat. € Playable USB devices USB mass storage class • Playable USB device file systems FAT12, FAT16, FAT32 The online manual about audio files is put on the site, www. Models of iPods/iPhones that can be connected to this unit Ejecting disc Open the Disc slot cover upward, and press [G]. Switch to a source other than USB, iPod, Pandora, and iHeartRadio, and then remove the USB device. Data contained in the USB device/ iPod may be damaged if you remove it when it is used as the active source. Removing USB device/ iPod Made for • iPod touch (5th generation) • iPod touch (4th generation) • iPod touch (3rd generation) • iPod touch (2nd generation) • iPod touch (1st generation) • iPod classic • iPod with video • iPod nano (7th generation) • iPod nano (6th generation) • iPod nano (5th generation) • iPod nano (4th generation) • iPod nano (3rd generation) • iPod nano (2nd generation) • iPod nano (1st generation) • iPhone 5 • iPhone 4S • iPhone 4 • iPhone 3GS • iPhone 3G • iPhone For information on the compatibility with iPod/iPhone software, visit www. English | 9 Before installation # WARNING • The unit can only be installed in a car with a 12V DC power supply, negative ground. € If you connect the ignition wire (red) and the battery wire (yellow) to the car chassis (ground), you may cause a short circuit, that in turn may start a fire. Always connect those wires to the power source running through the fuse box. € Do not touch the metal parts of this unit during and shortly after use of the unit. • Mounting and wiring this product requires skills and experience. For safety’s sake, leave the mounting and wiring work to professionals. € If you experience any problem during installation, consult your Kenwood dealer. € Disconnect the battery’s negative terminal before installing the unit. € Insulate unconnected wires with vinyl tape or other similar materials. To prevent a short circuit, do not remove the caps on the ends of the unconnected wires and terminals. € Be sure to ground this unit to the car’s chassis again after mounting. € If the fuse blows, first make sure the wires are not touching other parts to cause a short circuit, and then replace the old fuse with one with a new the same rating. € When connecting only two speakers, connect the connectors either to both of the front output terminals or to both of the rear output terminals (do not mix front and rear terminals). For example, if you connect the + connector of the left speaker to a front output terminal, do 10 | Quick Start Guide • not connect the - connector to a rear output terminal. The unit may be damaged or fail to work if you share the - wires or ground them to any metal part in the car. If your car’s ignition key switch does not have an ACC position, connect the ignition wires to a power source that can be turned on and off with the ignition key. [. . . ] € Some iHeartRadio™ functionality cannot be operated from this unit. • The “AAC” logo is a trademark of Dolby Laboratories. € “Made for iPod” and “Made for iPhone” mean that an electronic accessory has been designed to connect specifically to iPod or iPhone, respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE KENWOOD KDC-610U




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual KENWOOD KDC-610U will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.