User manual KENWOOD KDC-6051U

[. . . ] 16 About the Quick Start Guide This Quick Start Guide explains the basic functions of this unit. For functions not covered in this Guide, refer to the Instruction Manual (PDF file) contained in the included CD-ROM “Instruction Manual”. To refer to the Instruction Manual contained in the CD-ROM, a PC loaded with Microsoft® Windows XP/Vista/7 or Mac OS X® 10. The Instruction Manual is subject to change for modification of specifications and so forth. [. . . ] Turn the [VOL] knob to select recall number (“1” – “6”), and then press the [VOL] knob. (AA$ Function of KDC-BT61U/ KCA-BT300/ KCA-BT200 (Optional Accessory) Hands-free phoning [SRC] [VOL] [ Registering cell-phone KDC-BT61U ] [TI] Register your Bluetooth cellphone in this unit. KDC-6051U Calling a number in the Phone Book Dial the phone number in the phone book of your cell phone. If the phone book has not been downloaded to this unit, operate the cellphone to download it. 1 By operating the cell-phone, register the hands-free unit (pairing). select “KENWOOD BT CD/R-4P1” , “KCA-BT300” or “KCA-BT200” from the list of connected units. When registration of your cellphone is complete, the phone book of the cellphone is automatically downloaded to this unit. (If the phone book has not been downloaded to this unit, operate the cellphone to download it. Turn the [VOL] knob to select “Phonebook”, and then press the [VOL] knob. Turn the [VOL] knob to select initial of name, and then press the [VOL] knob. To prevent short circuits, remove the key from the ignition and disconnect the terminal of the battery. Take Connector B on the wiring harness and connect it to the speaker connector in your vehicle. Take Connector A on the wiring harness and connect it to the external power connector on your vehicle. Do not touch the metal part of this unit during and shortly after the use of the unit. For safety’s sake, leave the mounting and wiring work to professionals. € Do not install the unit in a spot exposed to direct sunlight or excessive heat or humidity. Also avoid places with too much dust or the possibility of water splashing. € If the power is not turned ON (“Protect” is displayed), the speaker wire may have a short-circuit or touched the chassis of the vehicle and the protection function may have been activated. € Make sure that all wire connections are securely made by inserting jacks until they lock completely. € If your vehicle’s ignition does not have an ACC position, or if the ignition wire is connected to a power source with constant voltage such as a battery wire, the power will not be linked with the ignition (i. If you want to link the unit’s power with the ignition, connect the ignition wire to a power source that can be turned on and off with the ignition key. € Use a commercially available conversion connector if the connector does not fit in the vehicle connector. [. . . ] € The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. Other trademarks and trade names are those of their respective owners. € “Made for iPod” means that an electronic accessory has been designed to connect specifically to iPod and has been certified by the developer to meet Apple performance standards. € “Works with iPhone” means that an electronic accessory has been designed to connect specifically to iPhone and has been certified by the developer to meet Apple performance standards. [. . . ]