User manual KENWOOD HM-383MD

[. . . ] MICRO HI-FI COMPONENT SYSTEM HM-383MD INSTRUCTION MANUAL KENWOOD CORPORATION COMPACT DIGITAL AUDIO TEXT B60-4931-00 (EN) 2 Before applying power Caution : Read this page carefully to ensure safe operation. Before applying power Units are designed for operation as follows. AC 230 V only Preparation section Safety precautions WARNING : TO PREVENT FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. THE LIGHTNING FLASH WITH ARROWHEAD SYMBOL, WITHIN AN EQUILATERAL TRIANGLE, IS INTENDED TO ALERT THE USER TO THE PRESENCE OF UNINSULATED "DANGEROUS VOLTAGE" WITHIN THE PRODUCT'S ENCLOSURE THAT MAY BE OF SUFFICIENT MAGNITUDE TO CONSTITUTE A RISK OF ELECTRIC SHOCK TO PERSONS. THE EXCLAMATION POINT WITHIN AN EQUILATERAL TRIANGLE IS INTENDED TO ALERT THE USER TO THE PRESENCE OF IMPORTANT OPERATING AND MAINTENANCE (SERVICING) INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THE APPLIANCE. The marking of products using lasers (Except for some areas) CLASS 1 LASER PRODUCT CAUTION INVISIBLE LASER RADIATION WHEN OPEN. [. . . ] 2 Turn the volume/multi control knob to select "REC OPTIONS", then press the set/ demo key. 3 Turn the volume/multi control knob to select "CD = MD", then press the set/demo key to start high-speed recording. If you want to control step 5 from the remote, simply press the MD O. T. E. key once to start recording. Turning the knob switches the display contents. 1 "CD = MD" : Select for high-speed recording of CD onto MD. 2 "CD = TAPE" 3 "TWIN REC" The recorded audio may skip, noise may be recorded on the MD or unnecessary tracks may be created depending on the condition of the CD. In such a case, restart recording at the normal speed. ÷ When either the playback of CD or recording of MD or tape is stopped, the other operation is stopped automatically. To interrupt a recording Application section At the end of the recording 7 stop Tuning Mode MD recorder : Stop. ÷ One high-speed recording starts, it is not permitted to record the same disc with high-speed recording for 74 minutes after the start of recording. If you want to record the same disc immediately, use one-touch edit recording (recording at normal speed). r (Recording and playback will be stopped) Do not turn power off or apply shock or impact while "MD WRITING" is displayed. If the power cord is unplugged before "MD WRITING" disappears, the recorded or edited data will be lost. Wait 74min. Time period until high-speed recording of the same disc is permitted ÷ High-speed recording of more than 100 tracks within 74 minutes is not permitted. 44 Convenient recording methods One-touch edit recording (CD =MD/ CD =TAPE) Records all tracks in a CD with a simple operation. (All-track recording) Records a single CD track being played from the beginning. (Single-track recording) The tape deck of the unit can record signals only on Normal (Type ) and High (Type ) tapes. It cannot record on Metal (Type ) tapes. Make sure to put the MD recorder or cassette deck to stop mode. 1 Make preparation for recording. CD = MD 1 Select the CD input. 2 Ensure that the "PGM" and "RANDOM" indicators are not lit. CD = TAPE 1 Perform steps 1 to 3 of the procedure in "Recording on TAPE". > 2 Ensure that the "PGM" and "RANDOM" indi3 Insert disc in the CD player. To record CD onto tape, go to step 3 3 Insert a recordable MD in the MD recorder. w ÷ If the "PGM" indicator is lit, turn it off by pressing the PGM key in stop mode to cancel the program mode. ÷ If the "RANDOM" indicator is lit, turn it off by pressing the RANDOM key to cancel the random play mode. ÷ When the "HIGH-SPEED" indicator is lit, the MD recording is performed as high-speed recording. 2 Select the recording mode. 1 Press the menu key. menu Application section 2 Turn the volume/multi control knob to select "MD REC MODE", then press the set/ demo key. Discs or tracks recorded in the LP2 or LP4 mode will produce no sound if they are played back on a player which is incompatible with the LP2 or LP4 mode. When a disc is expected to be MDLP-incompatible players, record it in the STEREO or MONO mode. 3 Turn the volume/multi control knob to select the recording mode, then press the set/demo key. volume / multi control Turning the knob switches the display contents. 1 "STEREO" : Stereo recording mode 2 "LP2" : Stereo LP2 recording mode 3 "LP4" : Stereo LP4 recording mode 4 "MONO" : Monaural recording mode set / demo \ (If you selected "STEREO" or "MONO", go to step 3. ) 4 To use the LP stamping function, turn the volume/multi control knob to set "LP: STAMP on", then press the set/ demo key. Turning the knob switches the display contents. 1 "LP: STAMP on" : Characters "LP:" are input at the beginning of each track title. 2 "LP: STAMP off" : Characters "LP:" are not input at the beginning of each track title. Convenient recording methods 45 3 Check the current play mode of the CD player. All-track recording If it is in play mode, stop it. 7 stop Tuning Mode Single-track recording Select the desired CD track and play it. ÷ When step 4 is performed in the middle of CD playback, the current track will be recorded from the beginning. (To record other tracks, repeat steps 3 and 4 for each track) 4 Start recording. MD O. T. E. TAPE O. T. E. or If you are operating the main unit, the same effect as step 4 can be obtained by selecting "REC OPTIONS" then selecting "CD = MD" or "CD = TAPE". ÷ When either the playback of CD or recording of MD or tape is stopped, the other operation is stopped automatically. To interrupt a recording At the end of the recording 7 stop Tuning Mode MD recorder Cassette deck : : Stop. [. . . ] W : 180 mm H : 255 mm D : 317 mm Weight (net) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5. 6 kg [Tuner section] FM tuner section Tuning frequency range . . . . . . . . . 87. 5 MHz ~ 108 MHz MW (AM) tuner section Tuning frequency range . . . . . . . . . . 531 kHz ~ 1, 602 kHz Speakers Enclosure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]