User manual KENWOOD AT265

[. . . ] Kenwood will not accept any liability if the appliance is subject to improper use, or failure to comply with these instructions. Before using for the first time 1 Wash the parts: see 'Cleaning'. Safety ● ● key ቢ ባ ቤ ብ ቦ ቧ ቨ ቩ ቪ ቫ pusher ● ● ● ● ● ● ● ● ● ● ● ● Do not use the juicer if the filter is damaged. [. . . ] Assembly and use 1 Place the pulp container onto the base unit and turn clockwise until it locks into position. When correctly fitted the spout should be located over the pulp container release lever. 3 Fit the lid into the pulp container with the interlock tab next to the arm of the base unit. Then turn clockwise until the interlock tab on the lid fits into the groove in the upright arm of the base unit. 4 Place the beaker holder onto the underside of the attachment – the arrow on the beaker holder should be pointing upwards and aligned with the spout and pulp container release lever. 5 Whilst holding the beaker holder in place, fit the attachment to the mixer by placing the spout over the corner of the high speed outlet and then turn clockwise to lock into position. 6 Move the beaker holder towards the back of the mixer and then fit the beaker. Swivel the holder into position so that the beaker is located underneath the juice outlet. Push the food down evenly with the pusher never put your fingers in the feed tube. To dismantle the juicer reverse the assembly procedure but press the pulp container release lever in order to remove the pulp container from base unit. — 1 2 3 4 5 6 7 ● Alternatively if you want to juice a large quantity of fruit or vegetables and just want to empty the beaker and pulp container carry out the following procedure:Switch off and unplug the mixer. Lift out the filter, Swivel the beaker holder to the side, lift off the beaker and empty. Press the pulp container release lever and rotate the pulp container anti-clockwise and lift off. Important If the juicer starts to vibrate, switch off and empty the pulp from the filter. [. . . ] Rubbing with a cloth dipped in vegetable oil helps remove discolouring. If you need help with: using your machine or ● servicing or repairs (in or out of guarantee) ట call Kenwood customer care on 023 9239 2333. Have your model number ready - it's on the underside of your machine. [. . . ]