User manual KENMORE 625.393060

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual KENMORE 625.393060. We hope that this KENMORE 625.393060 user guide will be useful to you.


KENMORE 625.393060 : Download the complete user guide (3925 Ko)

Manual abstract: user guide KENMORE 625.393060

Detailed instructions for use are in the User's Guide.

[. . . ] OWNER'S MANUAL Water Softeners With Deluxe Valve MODEL NOS. 300 Series 625. 383060 300 Series 625. 393060 Caution: Read and follow all safety rules and operating instructions before first use of this product. Questions ?Visit www. KenmoreWater. com or call toll free 1-800-426-9345 (M - F, 7AM - 8 PM CST) Repair or Parts ?Call toll free 1-800-366-7278 See back cover for other Sears service numbers. [. . . ] If you choose Potassium Chloride (KCI) as a regenerant, following these suggestions will help give you years of maintenance free service. Place only one bag of KCI in your softener at a time (the salt storage tank should contain no more than 60 pounds of KCI at any one time). A softener using KCI should not be placed in areas with temperature fluctuations and high humidity (KCI will harden in these environments and may make the softener inoperable). Check the brine tank and brine well (black tube in salt storage tank) monthly. If hardening is present, pour small amounts of warm water on hardened areas until they loosen. If your softener does not have a KCI salt setting you must increase your hardness setting by 25% to ensure continuous soft water as in example below. Raw Water Hardness (Grains Per Gallon) 5 gpg 10 gpg 15 gpg 20 gpg 25 gpg 30 gpg 35 gpg 40 gpg Softener Setting When Using KCI 7 gpg 13 gpg 19 gpg 25 gpg 32 gpg 38 gpg 44 gpg 50 gpg Brinewell Cover Brinewell Salt Storage Tank FIG. 29 Persons who are on sodium restricted diets should consider the added sodium as part of their overall sodium intake. For example, if your water supply is 15 grains hard, and you drank 3 quarts of softened water you would consume 335 milligrams of sodium. That is equivalent to eating 2-1/2 slices of white bread. WATER SOFTENING SALT WITH IRON REMOVING ADDITIVES Some salts have an additive to help the softener handle iron in the water supply. It is recommended to use Sears Resin Bed Cleaner (refer to the Parts List in back of manual for part number) for periodic treatments to keep your resin bed clean. Persons who are concerned about their drinking water should consider a Kenmore Drinking Water System that will remove or reduce in excess of 90% of the sodium and other drinking water contaminants. + 25 % = Questions?Call The Kenmore Water Line 1-800-426-9345 21 Check List CHECK LIST OF STEP-BY-STEP GUIDES TO INSTALL Review the following list to ensure you have completed all the installation procedures. Remove cardboard packaging from salt tank. Bypass Valve(s) Water Supply Valve Inlet ____3. 30 22 Faceplate Timer Features EXTRA RECHARGE Sometimes, a manually started regeneration (recharge) may be desired, or needed. Two examples are: · You have used more water than usual (guests visiting) and you may run out of soft water before the next timer started regeneration. · You did not refill the softener with salt before it was gone. You can start a regeneration right away, or you can set the timer to regenerate at the next 2:00 AM (or other preset recharge time). RECHARGE NOW Press the REGENERATION button and hold for 3 seconds. The words RECHARGE NOW begin to flash in the display, and the softener enters the fill cycle of regeneration right away. 31 RECHARGE TONIGHT Press and release (do not hold) the REGENERATION button. RECHARGE TONIGHT flashes in the display, and the softener begins regeneration at the next preset recharge time. Press and release the RECHARGE button once more if you decide to cancel the regeneration, and RECHARGE TONIGHT will not flash in the display. FIG. 32 SALT MONITOR SYSTEM The face plate timer has a low salt monitor with an indicator light to remind you to add salt to the storage tank. The salt level decal, on the brinewell inside the tank, has numbers from 0 to 8. [. . . ] The valve remains positioned in service until the electronic timer initiates the next regeneration. Soft Water To Valve Outlet Drain Position Switch FIG. Call The Kenmore Water Line 1-800-426-9345 41 Exploded View Kenmore MODEL Nos. 625. 383060 and 625. 393060 4 3 2 1 5 28 6 27 26 7 Rating Decal Location 25 24 23 22 21 8 9 10 11 12 20 19 17 13 16 18 15 14 Questions?Call The Kenmore Water Line 1-800-426-9345 42 Parts List Kenmore MODEL Nos. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE KENMORE 625.393060




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual KENMORE 625.393060 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.