User manual KENMORE 216.37020

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual KENMORE 216.37020. We hope that this KENMORE 216.37020 user guide will be useful to you.


KENMORE 216.37020 : Download the complete user guide (1341 Ko)

Manual abstract: user guide KENMORE 216.37020

Detailed instructions for use are in the User's Guide.

[. . . ] This warranty NOT pay for: covers only defects in material and workmanship. Expendable items that can wear out from normal use, including but not limited to filters, belts, light bulbs, and bags. 2o A service technician to instruct the user in correct product installation, operation or maintenance. 4o Damage to or failure of this product if it is not installed, operated or maintained according to the all instructions supplied with the product. [. . . ] Plug the polarized power cord into a 120 Volt outlet located near the floOr, r 4. Pressing the lever for automatic cord rewind \ draws in the power cord automatically. NOTE: Unclip cord from cord clip before pressing the lever for automatic cord rewind° NOTE: Hold onto the power cord to prevent the cord from whipping during the automatic cord rewind° w. , . , . . To reduce the risk of electric shock, this appliance has a polarized plug (one blade is wider than the other). If it still does not fit, contact a qualified electrician to install the proper outlet. Do not change the plug in any way. iiiii ! WARNING Personal Injury and Product Damage Hazard . Damage from cord to items in surrounding area could occur. HEIGHT ADJUST KNOB IMPORTANT: For easiest adjustment, place cleaner in full upright position. Turn the height adjust knob to match the surface being cleaned. Rotate the handle and adjust it to the desired position for (A) storing the upright, (B) operating the cleaner, and (C) to clean under furniture. , NOTE: Rotating brush could cause area rug fringe to become tangled within cleaner. Use caution when vacuuming any rugs with fringe. )A B C ON/OFF BUTTON Turn cleaner on by depressing the power on/off switch on the back of the cleaner. CARRY HANDLE Use the carry handle located on the back of the cleaner to carry from room to room. HANDLE RELEASE To release handle, push the handle release pedal located on the lower left side of the cleaner. PET HANDI-MATE CAUTION Brush agitator continues to rotate while hose is removed or in use and at all times while cleaner is on. Keep hair, loose clothing, fingers, and all parts of body away from brush area while cleaner is on. Cleaner must be in the upright position to lift the rotating brushroll off the carpet when cleaning above the floor. IIIl!lj I J !I I Attach the Pet Handi-Mate wand or telescoping start automatically° to the hose will wand. Brushroll I Cleaner must be in its upright position to raise brushroll from floor. Return filter to dirt container by placing on top of screen inside dirt container. Hold filter under running water to wash° Ring excess water out of filter. Allow filter to dry for at least 24 hours_ IMPORTANT: Do not return filter to the dirt container before it has completely dried. WARNING Electrical Shock injury Hazard and Personal Remove exhaust filter from cleaner. Tap filter on inside of garbage can to remove excess dust and dirt from filter. Disconnect electrical supply before servicing or cleaning the unit. Failure to do so could result in electrical shock or personal injury from vacuum cleaner suddenly starting. i Note: For best performance, replace exhaust filter a minimum of every 6 months. Grasp tab on exhaust filter cover and pivot forward to remove. Return exhaust filter to cleaner° Replace exhaust filter cover by inserting the tab on the cover into the slot on the cleaner. Pivot toward cleaner until into place_ cover snaps 12 TO REPLACE BELT WARNING Electrical Injury Shock and Personal Hazard OR BRUSHROLL Place new belt in area of brushroll without bristles. Disconnect electrical supply before servicing or cleaning the unit. Failure to do so could result in electrical shock or personal injury from vacuum cleaner suddenly starting, Place brushroll shutoff pedal in "Carpet" position. Ensure to loop the belt around the belt lifter shafL TO REMOVE BELT Lay cleaner flat and flip cleaner to expose nozzle base. Then depress lock B to unlock nozzle guard. . \ Rotate/pivot the pull off With new belt in place, pull and slide brushroll into nozzle making sure that the brushrotl end caps are in the correct orientation (see diagram for end cap orientation)_ Rotate brushroll manually to make sure belt is properly aligned. To reattach nozzle guard, rotate/pivot back into position° nozzle guard and Lift and remove brushroll. [. . . ] Or, a prorated refund anytime after the product warranty period expires. Purchase your Master Protection Agreement today7 Some limitations and exclusions the U. S. A. For prices and additional information in on some items, For full details call Sears Canada at Service For Sears professional installation of home appliances, garage door openers, water heaters, and other major home items, in the U. SoA. or Canada call 1-800-4-MY-HOME®. 16 Your Home For repair - in your home - of all major brand appliances, lawn and garden equipment, or heating and cooling systems, no matter who made it, no matter who sold it! [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE KENMORE 216.37020




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual KENMORE 216.37020 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.