User manual KEF PSW 1000.2

[. . . ] Do not expose batteries or apparatus with battery-installed to excessive heat such as sunshine, fire or the like. To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with the installation instructions. Indoor use only. This marking is located on the laser protective housing inside the enclosure. This appliance is classified as a CLASS 1 LASER product. This marking is located on the rear exterior. Disposal of waste batteries (applicable in the European Union and other European countries with separate collection systems) This symbol on the battery or on the packaging indicates that the battery provided with this product shall not be treated as household waste. [. . . ] · [Monaural]: Monaural reception. Press . The setting is made. To turn off the radio Press "/1. Presetting radio stations You can preset up to 20 stations. Before tuning, make sure to turn down the volume to minimum. 88. 00 MHz KEF FM 1 2 Press FUNCTION repeatedly until "FM" appears in the front panel display. Press and hold TUNING +/­ until the auto scanning starts. Station name (European and Russian models only) Scanning stops when the system tunes in a station. 1 2 3 4 5 6 Press OPTIONS. Press FUNCTION repeatedly until "FM" appears in the front panel display. Select the radio station. The option menu appears on the TV screen. Press X/x to select [Preset Memory], then press . Repeat Steps 2 to 5 to store other stations. Automatic tuning Press and hold TUNING +/­ until the auto scanning starts. To stop the automatic tuning manually, press TUNING +/­ or x. To change the preset number Select the desired preset number by pressing PRESET +/­, then perform the procedure from Step 3. Manual tuning Press TUNING +/­ repeatedly. 40GB Selecting the preset station 1 2 Press FUNCTION repeatedly until "FM" appears in the front panel display. · Not all FM stations provide RDS service, nor do they provide the same type of services. If you are not familiar with the RDS system, check with your local radio stations for details on RDS services in your area. · While receiving an RDS broadcast, each time you press DISPLAY, the display in the front panel display changes as follows: Station name t Frequency t Preset number t Stream information/Decoding status* t Station name t . . . * Does not appear depending on the setting of [Surround Setting]. The last received station is tuned in. Press PRESET +/­ repeatedly to select the preset station. The preset number and frequency appear on the TV screen and front panel display. Each time you press the button, the system tunes in one preset station. · You can select the preset station number directly by pressing the number buttons. Tuner Using the Radio Data System (RDS) (European models only) What is the Radio Data System? The Radio Data System (RDS) is a broadcasting service that allows radio stations to send additional information along with the regular program signal. This tuner offers convenient RDS features, such as station name display. [Subwoofer] 3. 0 m: Set the subwoofer distance. * This item appears when you set it to [Yes] in the [Connection] setting. · Depending on the input stream, [Distance] may not be effective. [Yes] [Centre] [Yes]: Normally select this. [None]: Select this if no center speaker is used. [Surround] x [Level] [Yes]: Normally select this. [None]: Select this if no surround speaker is used. [Subwoofer] You can adjust the sound level of the speakers. [Subwoofer] 0. 0 dB: Set the subwoofer level. * This item appears when you set it to [Yes] in the [Connection] setting. [Yes] x [Distance] When you move the speakers, be sure to set the parameters of the distance (A) from the listening position to the speakers. You can set the parameters from 0. 0 to 7. 0 meters. 44GB x [Test Tone] The speakers will emit a test tone to adjust [Level]. [On]: The test tone is emitted from each speaker in sequence while adjusting level. When you select one of the [Speaker Settings] items, the test tone is emitted from each speaker in sequence. Adjust the sound level as follows. Using the Sleep Timer You can set the system to turn off at a preset time, so you can fall asleep listening to music. The time can be preset in intervals of 10 minutes. Press SLEEP. Each time you press SLEEP, the minutes display (the remaining time) in the front panel display changes by 10 minutes. When you set the sleep timer, the remaining time appears every 5 minutes. [. . . ] Move the unit away from such devices, or turn off such devices. The desired wireless router is not · Press RETURN to return to the previous screen, and try [Scan] again. If the detected even if [Scan] is desired wireless router is still not detected, press RETURN to select [Manual performed. The system cannot connect to the · The distance between the unit and the wireless LAN router is too far (page 22). network or the network connection is unstable. 66GB Playable Discs Blu-ray Disc DVD3) Note on playback operations of a BD/DVD Some playback operations of a BD/DVD may be intentionally set by software producers. [. . . ]