User manual JWIN JX-CD650

[. . . ] Now it's time to consider how you can maximize the fun and excitement your equipment offers. This manufacturer and the Electronic Industries Association's Consumer Electronics Group want you to get the most out of your equipment by playing it at a safe level. [. . . ] Note: FSP function will automatically engage (Pg11) 5 AC Operation (optional) 1. Insert the DC plug, at the end of the AC adaptor cord into the DC input socket, at the side of the unit. Note If the AC plug does not fit in your AC outlet, a plug adaptor (not included) should be used. Consult your local dealer on the type of plug adaptor required. 2 3 6 1 Battery Type (using 2 batteries) Alkaline MN 1500, LR 6 or Equivalent Ni-CAD rechargeable (min. Specification recommended 1. 2V-650mA) Anti Shock Mode Only Turning Power on and off 4 13 Hours (not supplied) 5 Hours Note: Zinc/Carbon, or Zinc/Chloride type batteries are not recommended for this unit as their use will result in extremely short playing times. Wherever possible and for economy it is recommended that the AC adaptor supplied with this unit is used. To remove the disc Hold the edge and gently press the center pivot as illustrated, then pick up the disc. This unit has no ON/OFF switch. To turn on: Press PLAY/PAUSE (playback Starts) To turn off: Press STOP button once to enter standby mode. Press STOP button twice, to turn off the power immediately. Auto power - off function When the unit is stopped (standby mode) for approximately 1 minute, the power is automatically turned off. CAUTION: Wait for the disc to stop rotating before sliding the OPEN switch. NOTE: Only compact disc marked with the are guaranteed to work on this player. Home recorded disc's (CDR) recorded on home PC's may not play or operate correctly. Do not use a CD single adaptor for these discs. HEADPHONE AND HI-FI CONNECTION Listening with the Hearphones Connect the plug of the stereo earphones (not included) or headphones (included) into the PHONES (Green) socket. Caution: Avoid excessive volume levels and listening to sound for a long period of time when using headphones. Connecting to component audio systems Connect the stereo connection cable (not included) into the LINE OUT (BLACK) socket of the unit and the CD/AUX inputs of an audio system. Note: Always switch the power off before making any connections between the player and another unit. 4 5 LCD DISPLAY INFORMATION When the is pressed at initial start up The display will briefly show as diagram then proceed to start playback. [. . . ] If the cabinet is very dirty, dampen the cloth with a weak solution of neutral detergent and water, and then wipe clean. Cleaning the Lens A dirty lens will cause sound skipping and, if the lens is very dirty, the CD may not work. [. . . ]