User manual JWIN JX-CD492

[. . . ] DANGER: INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCK FAILED OR DEFEATED. CAUTION: HAZARDOUS LASER RADIATION WHEN OPEN AND INTERLOCK DEFEATED. CAUTION CLEANING: Always disconnect unit from power supply before attempting to clean it. Do not use solvents or abrasive materials. 2 LOCATION OF CONTROLS TOP VIEW 1. DBBS ON/OFF Button FM Antenna Handle CD Door Cassette Control Buttons (PAUSE/STOPEJECT/FFW/REW/PLAY/RECORD) CD Door Open Lid Volume Control FUNCTION Selector (TAPE -"CD/Radio Off" /RADIO/CD) FM STEREO/MONO Selector 1 2 3 4 5 6 7 8 9 FRONT VIEW 10. [. . . ] Press it again to resume playing. TAPE RADIO CD PLAY/PAUSE 2. If there is no CD inside or disc damaged, a "- - -" display will be appear. When there is no disc While paused Loading a disc 1. Lift the CD door lid (6) to open the CD door. To stop the disc Press the STOP button (13) or (32). STOP/BAND 2. Note: Ensure the disc is pushed fully and locked in place. Stop condition (TOC display) After reading TOC Note: This unit is CD-R / -RW compatible. To play the disc Press the PLAY/PAUSE button (18) or (28) to play the CD. PLAY/PAUSE Playing track 1 7 Skip and Search Function Press the SKIP Next or Back buttons (14)/(17) or (30)/(31) briefly. SKIP/ TUN DN SKIP/ TUN UP OR IN PLAY MODE PRESS ONCE PRESS TWICE BACK TO THE BEGINNING OF PREVIOUS THE CURRENT TRACK TRACK NEXT TRACK IN STOP MODE PRESS ONCE PREVIOUS TRACK NEXT TRACK Press and hold the SKIP button during playback : : FAST FORWARD : FAST BACKWARD NOTE : During search mode low level audio will be heard to assist in locating the correct point in the track. To repeat a track or disc Press the PLAY MODE button (29) on the remote control one time, "one track repeat" will be active. (REPEAT Flashes) PLAY/ MODE One track repeat (flashing) With one more press, "all track repeat" will be active. (REPEAT ALL will show steadily) With one additional press, the repeat mode is cancelled. PLAY/ MODE All track repeat (steady) Random play function In CD stop mode, press the PLAY MODE button (29) on remote control three times (RANDOM displayed), then press PLAY/PAUSE button (18) or (28) to start random play. Press PLAY MODE button (29) once again to change normal playing mode. PLAY/ MODE Random playing start 8 PROGRAMMED PLAYBACK This CD player enables you to program up to 20 tracks in the sequence of your choice. Continue to program, repeat steps 2 and 3 for each selection. When program is full PROGRAM Reviewing programs Press the PROGRAM button (21) or (27) repeatedly. Press the SKIP Forward or Backward button (14)/(17) or (30)/(31) to select the desired track to be programmed. SKIP/ TUN DN SKIP/ TUN UP 5. Press PLAY/PAUSE button (18) or (28) to play the programmed tracks. OR Choose track 4 Clear the program Press the PROGRAM button (21) or (27) to recall previously programmed track ("MEMORY" icon flashes), then press CD stop button to cancel the preset programs or change function mode or open the CD door. Press the PROGRAM button (21) or (27) one time, then the selected track, e. g. , track 4 is stored. PROGRAM 9 PLAYING MP3 DISCS 1. Press CD SKIP / buttons (14)/(17) or (30)/(31) to select desired track. TAPE RADIO CD SKIP/ TUN DN SKIP/ TUN UP OR 2. If there is no disc inside or disc damaged, a "- - -" display will be appear. When there is no disc Folder 2 track 3 selected Loading a disc 1. Note: Ensure the disc is pushed fully and locked in place. After reading TOC PLAY/PAUSE Playing track 3 of folder 2 Note: This unit is CD-R / -RW compatible. Press the FOLDER UP or DN button (20)/(12) or (26) to select desired folder. Total tracks of select folder will then be shown. Folder 2 selected Tracks of folder 2 To pause the CD Press the PLAY/PAUSE button (18) or (28) while the disc is playing. Press it again to resume playing. PLAY/PAUSE While paused 10 To stop the disc playing Press STOP button (13) or (32). Stop condition (TOC display) Note: Once your desired mode selected, press the PLAY/PAUSE button (18) or (28) to start playback from stop mode. Press the PLAY MODE button (29) on the remote control fifth for cancel above modes. PROGRAMMED PLAYBACK This CD player enables you to program up to 20 tracks in the sequence of your choice. Follow steps 2 and 3 in "LISTENING TO THE RADIO" to tune in the station you wish to record. Insert a blank tape to cassette compartment then close the cassette door. [. . . ] Rotate unit until best reception is obtained. Radio Noise or sound distorted on AM or Station not tuned properly for AM or FM FM broadcasts. AM : Unit is not positioned correctly. AM or FM, no sound. FUNCTION Selector not set to Set FUNCTION Selector to RADIO position. Volume at minimum Increase Volume. Cassette Player No sound. Sound distorted. Compact Disc Player CD Player will not play. FUNCTION selector not set to Set FUNCTION selector to TAPE TAPE position. [. . . ]