User manual JWIN JX-CD404D

[. . . ] When inserting the batteries, be sure to place the batteries as the sketch shown, mistakenly inserting even one with improper polarity will cause leakage and the unit will not play properly. When not using the unit for an extended period of time, or not use the batteries for a long time, remove them to prevent possible acid leakage or corrosion resulting in damage to your player or personal injury such as skin burns. If sound gets distorted or if the unit fails to switch tracks, your batteries are weak. If the display shows the symbol " place them or use the AC adaptor. [. . . ] (ADAPTOR NOT INCLUDED) AUTO POWER ON FUNCTION The power turns on automatically when the PLAY/PAUSE button is pressed. AUTO POWER OFF FUNCTION The power turns off immediately after the disc compartment is opened. When all the tracks on a disc have been played, or the Stop button is pressed, the power turns off automatically within 60 seconds if no button is pressed. If you pressed the Stop button twice the power will turn off 2 THE HOLD FUNCTION It is useful during playing, the function will lock the key on the panel to protect the mistake in the Playing. During playing slide the HOLD switch to "ON" position, the "HOLD" will appear in the display, the key on the panel will be locked, the panel key is disabled. Slide the HOLD Switch to "OFF" position to stop the function. LISTENING WITH HEADPHONES Connect the plug of the stereo headphone into the headphone jack (marked phones) before use the unit. CAUTION: Hearing experts advise against exposure to continuous extended play at loud volume levels while using headphones, possible hearing loss may result. If you experience a ringing in the ears, reduce volume or discontinue use. We want you listening for a life time. PLAYING A DISC Be sure to reduce the volume before plugging in or unplugging the headphones/ earphones 1. Hold the disc with the label side up and press it onto the spindle until it "clicks" into place. Close the disc compartment, press PLAY/PAUSE button, the disc will begin to spin, the display will indicate "01", play will begin immediately from track number 1. To stop play, press the Stop Button, and the power turns off automatically after a while. This unit is designed to play compact discs bearing the identification logo to the right. Discs that do not carry this logo may not conform to the CD standard and may not play properly. Discs should be returned to their cases after use to avoid serious scratches that could cause the laser pickup to skip. Do not expose discs to direct sunlight, high humidity, or high temperatures for extended periods. Sharp writing instruments, or the inks used in some felt-tip pens, may damage the surfaces of the disc. Always place the compact disc to be played in the CD compartment with the label facing upward. Fingerprints should be wiped from the surface of the disc with a soft cloth. Unlike conventional records, compact discs have no grooves to collect dust and microscopic debris, so gently wiping them with cloth should remove most of the particles. Never use such chemicals as record cleaning sprays, antistatic sprays, benzene or thinner to clean compact disc. · The unit will not play a disc that has been inserted upside down, or discs that do not conform to the Compact Disc standard. Also, the unit might not play discs that are scratched, soiled or carry fingerprints. [. . . ] · Both 8cm and 12cm discs can be played in this unit. TECHNICAL SPECIFICATIONS CD PLAYER SECTION Frequency response . . . . . . . . . . . . . . . . . . . . . . optical 3-beam semiconductor laser (780 nM wavelength) GENERAL Power supply DC . . . . . . . . . . . . . . . . . . . . . . . . . . 3V using two "AA" batteries AC/DC adaptor 220V - 4. 5V Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 138mm(W)x138mm(D)x29. 5mm(H) Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]