User manual JWIN JX-CD2002

[. . . ] Notice that its two legs are mounted closer to one side of the pedestal's base than to the other. [. . . ] At this time, also check that the small platform above the pedestal is oriented as shown in INSET 1. - Carefully lift the Main Unit by grasping its top rear extension with one hand, and its bottom with the other. - Place one foot on the base of the pedestal to steady it, and with the Main Unit facing you, align the Main Unit's bottom groove with the mating groove atop the pedestal. - At the rear of the Main Unit, push the pedestal's two locking flaps UP (see INSET 2) until they click and lock the Main Unit in place. Place a foot on the base of one pedestal to steady it, and align the bottom groove of the Speaker Unit with the mating groove atop the pedestal. Slide the Speaker Unit all the way onto to the pedestal until it stops. - At the rear of the pedestal, push the two locking flaps UP until they click and lock the Speaker Unit in place. - Position both pedestal/Speaker Unit assemblies in the desired location in your premises. UNIT'S PEDESTAL Speaker Unit Disassembly - Locate the two locking flaps on the pedestal mount and push them both DOWN to release the Speaker Unit from its locked position. [. . . ] - Position both pedestal/Speaker Unit assemblies in the desired location in your premises. UNIT'S PEDESTAL Speaker Unit Disassembly - Locate the two locking flaps on the pedestal mount and push them both DOWN to release the Speaker Unit from its locked position. [. . . ]