User manual JWIN JL-707
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual JWIN JL-707. We hope that this JWIN JL-707 user guide will be useful to you.
 |
Manual abstract: user guide JWIN JL-707
Detailed instructions for use are in the User's Guide.
[. . . ] To prevent fire or shock hazard, do not expose the apparatus to rain or moisture. The clock display will blink to indicate a power interruption and that the display time is incorrect. To set the correct time, press the MINUTE button (10) or HOUR button (9) until the correct time is displayed while pressing and holding the TIME SET button (6). [. . . ] To set the correct time, press the MINUTE button (10) or HOUR button (9) until the correct time is displayed while pressing and holding the TIME SET button (6). The purpose of this battery is to store the information relating to the alarm time and to keep the clock functioning in the event of disconnection from the power supply or power interrruption. In case of the power failure, the clock will continue to keep time but will not display it. THE LED DIGITAL CLOCK AND THE PROJECTION CLOCK MUST BE SET SEPARATELY TIME SETTING FOR PROJECTION - To set HOUR, press simultaneously the HOUR BUTTON (21) and the TIME SET BUTTON (20). - To set MINUTE, press simultaneously the MINUTE BUTTON (22) and the TIME SET BUTTON (20). - Focus setting : To adjust the projection focus, turn the FOCUS ADJUSTMENT KNOB (23) until the projected time is clearly shown on the ceiling or wall. NOTE : THE MAXIMUM PROJECTION DISTANCE IS 3-9 FEET.
TO SET OR RESET THE ALARM TIME 1. The display will be changed to 1 hour and 59 minutes, which is the maximum sleep time setting. Release the SLEEP SET button (7) when you finish to set the sleep time. The radio will now operate until the sleep time has elapsed or may be switched off by pressing the SNOOZE/SLEEP-OFF button (4).
Notes: Pressing the SLEEP SET button (7) again after setting the sleep time will reset the sleep time to 59 minutes. TO TUNR ON THE RADIO The AM radio band uses an internal antenna to receive a signal. For FM, ensure that the FM pig-tailed antenna is completely uncoiled and extended. To turn off the radio, set the ON/OFF/AUTO swtich (1) to `OFF' position. If the radio does not switch off, this may be caused by inadvertent operation of the sleep function. [. . . ] For FM, ensure that the FM pig-tailed antenna is completely uncoiled and extended. To turn off the radio, set the ON/OFF/AUTO swtich (1) to `OFF' position. If the radio does not switch off, this may be caused by inadvertent operation of the sleep function. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE JWIN JL-707
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual JWIN JL-707 will begin.