User manual JWIN JC-CD260 INSTRUCTION MANUAL

[. . . ] 1) menu1: Press and hold longer than one second to activate the DSP feature. Rotate the SEL knob to select DSP mode sound effect as shown in sequence below. User setting value of bass/treble in normal mode is always memorized. In rock/classic/pops mode, bass/treble mode is skipped and level is not changeable FLAT----CLASSICS----POP M----ROCK M----DSP OFF. -- 1 -- LCD DISPLAY NORMAL FLAT ROCK CLASSIC POP DSP OFF FLAT M ROCK M CLASSIC M POP M BASS (F=100HZ) X dB 0 dB 6 dB 2 dB -4 dB MID (F=1KHZ) TREBLE (F=10KHZ) 0 dB 0 dB 0 dB 0 dB 0 dB X dB 0 dB 2 dB 2 dB -2 dB 8. LOCAL/DISTANT BUTTON Press local/distant(LO/DX) button for listening to weak stations. LOC indicator will appear on the display. [. . . ] 6) ENTER:User can select track/files and do character search while in Mp3 MODE. LOUDNESS BUTTON -Press this button to boost the bass and treble response. Push the button again to return to normal operation. This function is useful when listening at low levels. loudspeakers are ineffici ent at low power levels and will tend to sound flat. The loudness control will boost the bass and treble response thus giving a more lively performance. LCD DISPLAY -The liquid crystal display will display the current status of the unit. BAND SELECTOR SWITCH Press this switch to select the desired Radio band. Selection is made in regular sequence as FM-AM. AUTOMATIC OR MANUAL TUNING(FREQ UP>>OR FREQ DOWN<<) (A) RADIO MODE When pressed for less than 1 second, these keys operate as manual tuning mode. When pressed longer than 1 sec. , they are operated as SEEK tuning mode. (AUTO) (B) CD PLAYER MODE When pressed for less than 1 second, these keys operate as TRACK UP or TRACK DOWN. When pressed longer than 1 sec. , they will operate as CUE or REVIEW mode. LOCAL/DISTANT BUTTON Press local/distant(LO/DX) button for listening to weak stations. LOC indicator will appear on the display. Press this button again (Distant mode) for normal operation. -- 2 -- -- 3 -- CD CONTROL LOCATION OF PARTS 17 19 18 LUD M P3 C D / C D / C D - R / C D - R W PLAYE R LUD D. If LCD shows 013 then , press ENTER key again. e. Third digit 0 is displayed. Then press SEARCH UP key 3 times to enter 3 RD digit to 3. f. Press ENTER key LCD shows 133, The track number is selected and ready to be played. f. SEARCH UP/DOWN key perform to shift number grom 0-9 as a loop rotation. BND MUT CLK PUSH SEL DISP RPT RDM SCAN ALL DIR SONG CLASSIC JAZZ MUSIC MUTE LOUD MONO AF PTY EON ST LOC LUD 60 WATT/DIGITAL TUNING SYSTEM SCN A/PS 1 LUD 2INT 3RPT 4RDM 5D-DN 6D-UP MODE 20 21 22 23 17. CD EJECT BUTTON Press the EJECT button to remove the CD. The receiver will automatically switch to radio mode. 18. CD SLOT 19. TRACK/SEARCH BUTTON FORWARD AND REVERSE TRACK SEARCH Press the SKIP button or during play to go to the desired track(song). ( . . . . REVERSE)( . . . . FORWARD ) Press and hold the SKIP button or during play to scan the disc at high speed. When the desired music section of the disc is found, release the button. Normal play will resume. [. . . ] 2. 1 INSTALLATION 3. NOTE: Choose the mounting location where the unit will not interfere with normal driving function. Before finally installing the unit, connect the wiring temporarily and make sure it is all connected properly and the unit and the system work properly. Use only the parts included with the unit to ensure proper installation. [. . . ]