User manual JVC XM-228

[. . . ] MD RECORDER XM-228BK 1 5 9 REPEAT REC PAUSE 2 6 10 3 7 4 8 +10 CANCEL RANDOM PROGRAM TRACK TITLE DISPLAY MARKING /EDIT /CHARA SCROLL ENTER SET RM-SM228EU REMOTE CONTROL INSTRUCTIONS For Customer Use: Enter below the Model No. Serial No. LVT0111-003B [B] Warnings, Cautions and Others IMPORTANT for the U. K. If the plug fitted is not suitable for the power points in your home or the cable is too short to reach a power point, then obtain an appropriate safety approved extension lead or consult your dealer. BE SURE to replace the fuse only with an identical approved type, as originally fitted. [. . . ] The display shows "EDITING" and the TOC indicator lights up. 12345 67 TOC indicator: The TOC indicator shows that the MD has new data that should be memorized. The data writing operation is done by ejecting the MD or by turning the power off. Before the MD is ejected or the power is turned off, "UTOCwriting" is displayed until data is completely written. or 7 Press 0 on the main unit or the remote control unit to eject the MD. The data in the memory is written in the MD before it is ejected. The display shows "UTOCwriting" during MD writing operation. · · Be careful not to apply impact to the MD recorder during writing data in the memory in the MD. The data in the memory is written in the MD also when the unit is switched to Standby mode while "EDITING" is being displayed. To exit editing: Press EDIT on the main unit or the TITLE/EDIT on the remote control unit before pressing ENTER in step 6. Then, press the same button repeatedly until the editing track number is displayed. To restore the original track from the divided tracks: Use the JOIN editing function mentioned below. Joining tracks (JOIN) Two adjacent tracks can be joined into a single track by deleting the unnecessary track marking. This also makes it possible to join more than two tracks into a single track or a piece of music divided into multiple tracks into a single piece. The track numbers after the joined tracks are decremented automatically. TITLE /EDIT or 1 Press EDIT on the main unit or the TITLE/EDIT on the remote control unit to select "JOIN". The JOIN indicator lights up. · When TITLE/EDIT on the remote control unit is used, the disc title is displayed after "ALL ERASE". DIVIDE JOIN MOVE ERASE ALL ERASE MD total playing time display (Disc title) Blinks 12345 6 20 2 Press SET on the main unit or the remote control unit. SET or Blinks Blinks 12345 6 or 3 Select the track to be joined with the previous track. Using the jog dial or 4 or ¢ : Select the track number by turning the jog dial on the main unit or 4 or ¢ on the remote control unit. 2 is selected Using the numeric keys: Select the track number with the numeric keys on the remote control unit. To select a track, see "Selecting a track with the numeric keys" on page 9. Example) To join track numbers 1 and 2, select track number 2. 4 Press SET on the main unit or the remote control unit. SET or Track numbers 1 and 2 blink, indicating that these tracks will be joined into one. Blinks Blinks 12345 6 · If you selected a wrong track number, press 7STOP/CANCEL on the main unit or CANCEL on the remote control unit and repeat from step 3. 5 Press ENTER on the main unit or the remote control unit. or ENTER The change made above is entered temporarily in the memory. The display shows "EDITING" and the TOC indicator lights up. 12345 Decrements by 1 6 Press 0 on the main unit or the remote control unit to eject the MD. or The data in the memory is written in the MD before it is ejected. The display shows "UTOCwriting" during MD writing operation. · · Be careful not to apply impact to the MD recorder during writing data in the memory in the MD. The data in the memory is written in the MD also when the unit is switched to Standby mode while "EDITING" is being displayed. To exit editing: Press EDIT on the main unit or the TITLE/EDIT on the remote control unit before pressing ENTER in step 5. Then, press the same button repeatedly until the editing track number is displayed. To restore the original tracks from the track obtained by joining: Use the DIVIDE editing function. See "Dividing a track (DIVIDE)" on page 19. 21 Moving a track (MOVE) A track can be moved to the desired position by selecting its track number and the destination track number. TITLE /EDIT 1 Press EDIT on the main unit or the TITLE/EDIT on the remote control unit to select "MOVE". The MOVE indicator lights up. · When TITLE/EDIT on the remote control unit is used, the disc title is displayed after "ALL ERASE". DIVIDE JOIN MOVE ERASE ALL ERASE or MD total playing time display (Disc title) Blinks 12345 6 2 Press SET on the main unit or the remote control unit. SET or "1" for track number 1 will blink on the display. Blinks Blinks 12345 6 3 Select the track number to be moved, then press SET. [. . . ] Due to the restrictions imposed by this MD recording format, following symptoms may be observed. Note that these symptoms do not indicate malfunction of the product. Symptom "DISC FULL" is displayed before the available recording time indicated on the disc has been used. "DISC FULL" is displayed although there remains margin in both the number of tracks and available recording time. The remaining recording time does not increase after some tracks are erased. [. . . ]