User manual JVC XL-R5000

[. . . ] CD/CDR MULTIPLE COMPACT DISC RECORDER XL-R5000BK CD REC CD EDIT SYNCHRO DISPLAY POWER FINALIZE MENU CD 1 1 4 7 10 2 5 8 +10 3 CD 2 XL - R5000 CD/CDR MULTIPLE COMPACT DISC RECORDER EJECT REC LEVEL 6 CD 3 9 CONTROL CD SET REC SOURCE SELECTOR PLAY & EXCHANGE CDR CANCEL CD CONTROL 3-CD DIGITAL CD LINE MIXING MIC FINALIZE MIN MAX PLAY MODE REPEAT CDR CONTROL MIX BALANCE PHONES LEVEL PITCH + STANDBY CLOCK/ TIMER PLAY MODE CD EDIT CD REC DISPLAY MENU MULTI JOG REC MUTING SYNCHRO REC CANCEL SET POWER ­ + LINE MIC CD LINE MIN MAX MIC PHONES PITCH 0 REC PITCH ­ SHIFT REC MUTING REMOTE CONTROL RM-SXLR5000J INSTRUCTIONS For Customer Use: Enter below the Model No. Serial No. LVT0452-001C [ J/C/B/U ] Warnings, Cautions and Others For U. S. A. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. [. . . ] Synchronized one-button single track recording (page 20) Press the CD REC button while the unit is playing or paused to instantly dub the current track on a CD in the 3-CD changer to a CD-R or CD-RW. Listening Edit recording (page 21) Select tracks to be recorded while listening to a CD in the 3-CD changer. Program Edit recording (page 22) Program tracks to be recorded from one or all of the CDs loaded in the 3-CD changer. Synchronized start recording (page 25) Start recording a source as soon as the CDR detects an input signal from that source. Mixed input recording (page 26) Combine and mix the volumes of two selected analog inputs for recording. Manual Recording 5 XL - R5000 CD/CDR MULTIPLE COMPACT DISC RECORDER 3 1 REC LEVEL 4 MIN MAX MIX BALANCE PHONES LEVEL MULTI JOG STANDBY POWER ­ + 62 1 2 Insert a recordable CD-R or CD-RW. Press REC ¶ to put the CDR in record pause mode. · The remaining recording time on the CD-R or CD-RW appear in the display window. 3 Select (one of) the recording sources. Automatic and manual track marking (page 19) · When automatic track marking is turned on Tracks are automatically set in the recording. For digital sources, the track information recorded in the digital source signal is used. For analog recording, spaces of silence are interpreted as track separations. · Adding track marks manually Manual track marking offers the flexibility to place track marks anywhere in your recording. However, when automatic track marking is turned on, manual track marking cannot be operated. · DIGITAL : For recording the sound of a unit which has been connected to the OPTICAL IN connector (digital input) When you switch from DIGITAL source recording to another source, press the DIGITAL button once to turn off the indicator, and then select the other source. · CD : For recording the CDs loaded in into CD1, CD2 and/or CD3 Press CD repeatedly to select either DIGITAL or ANALOG recording. Note: Analog recording is performed for CD+LINE or CD+MIC mixing even when the CD pitch control has been set to OFF. · LINE : For recording the sound of a unit which has been connected to the LINE IN connectors (analog input) : For recording the sound from a microphone which has been connected to the MIC connector (analog input) · MIC Sampling rate converter The unit incorporates a sampling rate converter to ensure that the original digital signals will be recorded regardless of the sampling frequency (32 kHz, 44. 1 kHz or 48 kHz) of the source being recorded. Notes · If a source has already been selected, its corresponding lamp will light. · When playback is stopped and the CDR is selected, pressing the DISPLAY button displays the remaining recording time on the disc for 3 seconds. 18 English 4 When analog signals are to be recorded, adjust the recording level. REC LEVEL · REC MUTING cannot be used at the beginning of a recording from the record pause mode · Adjust the volume in such a way that the 0 dB display is not exceeded when the loudest sound is supplied. L R 40 30 20 15 10 6 3 0 dB Setting automatic or manual track marking When automatic track marking is turned on, tracks are automatically set in the recording. For digital sources, the track information recorded in the digital source signal is used. For analog recording, spaces of silence are interpreted as track separations. For analog recording, automatic track marking is performed when the unit detects 4 seconds of silence in the recording. Manual track marking offers the flexibility to place track marks anywhere in your recording. MIN MAX The OVER indicator should not be made to light as this may cause distortion in the recording. 5 Play the sound of the source to be recorded. · If the CD1 button is pressed when CD serves as the source, the tracks are recorded in the following sequence: CD1 = CD2 = CD3 To turn on automatic track marking XL - R5000 CD/CDR MULTIPLE COMPACT DISC RECORDER REC LEVEL 6 Press the 3 (play) button to start recording. MIN MAX MIX BALANCE PHONES LEVEL When recording is complete Press the 7 (STOP) button to stop, the 3 indicator flashes and operation stops. Note · When UNLOCK appears in the display, the OPTICAL IN connector is not connected to the source unit. Operating any button while this indicator flashes may render the disc unusable. Always wait until the 3 indicator stops flashing before proceeding with the next operation. · When digital input signals are supplied, they will be recorded in their original digital form. [. . . ] Trouble with the CD-RW has prevented an erase function from being performed. Trouble with the CD-RW has prevented the unfinalize function from being performed. The UNFINALIZE function cannot be performed with discs recorded using the "DISC at Once" recording system. The maximum number of 21 tracks on the disc that can be skipped has been reached. [. . . ]