User manual JVC VR-5505 service manual

[. . . ] It will result in damage. Please read the following before getting started: Thank you for purchasing this JVC product. Before operating this unit, please read the instructions carefully to ensure the best possible performance. For the setting method, refer to `Setting up Areas' on page 18. LLT0094-001C SAFETY PRECAUTIONS Warning Notice FOR YOUR SAFETY (Australia) 1. Insert this plug only into effectively earthed threepin power outlet. 2. If any doubt exists regarding the earthing, consult a qualified electrician. [. . . ] * The buzzer will not sound even when the REC STOP buzzer parameter has been set at "ON" if the [REC TO STOP MESSAGE] setting on the [ON-SCREEN MODE] menu has been set at "OFF". Select your desired item with the [ / ] keys, and then change the value of the setting with [­/+]. Settings EXT REC (See page 29) Recording will start/stop with input into the [EXT REC IN] terminal on the rear panel. Signals output during recording. ALARM REC: Signals only output during alarm recording. Warning Types: VIDEO LOSS, HDD ERROR, FAN MOTOR ERROR, PASSCODE ERROR, POWER FAIL Set value: OFF, ON 3. Select [SAVE] with the [ / ] keys, and then press [SET]. USER: Selects whether or not to output signals depending on 49 Useful Features Hard Disk Maintenance When a power failure occurs while in the Recording mode or Alarm Record Standby mode, or when a failure occurs in the recorded data on the hard disk, recording/playback may not function properly. To repair the hard disk, two types of scan disk functions are available on the VR-509: MANUAL SCAN DISK Performs manual scanning of the hard disk. Perform Manual Scan Disk regularly when the [AUTO SCAN DISK] item in the menu is set to "OFF" or when the power to the equipment remains on for extensive periods of time. · Opens the menus in accordance with the instructions AUTO SCAN DISK Scans the hard disk automatically when the power is switched on. · Opens the menus in accordance with the instructions provided in Changing MENU Settings (page 17) in the sequence of [MENU] [OPERATION MENU] [MAINTENANCE]. MAINTENANCE AUTO SCAN DISK MANUAL SCAN DISK ALARM LIST CLEAR DEFRAG DATABASE. . OFF EXEC EXEC provided in Changing MENU Settings (page 17) in the sequence of [MENU] [OPERATION MENU] [MAINTENANCE]. MAINTENANCE AUTO SCAN DISK MANUAL SCAN DISK ALARM LIST CLEAR DEFRAG DATABASE. . CAUTION The hard disk cannot be initialized when in the following operation modes: · · · · · During recording. When a malfunction occurs with the hard disk. · · · 51 Useful Features Setting up the Hard Disk for Mirroring Mirroring refers to recording the same data in the 2 built-in hard disks. In this way, recorded data can be secured even if data on one of the hard disks is damaged. (See on page 53 for the notes on "Setting up MIRRORING") Canceling MIRRORING 1. · Opens the menus in accordance with the instructions Setting up MIRRORING 1. · Opens the menus in accordance with the instructions provided in Changing MENU Settings (page 17) in the sequence of [MENU] [OPERATION MENU] [MAINTENANCE] [MIRRORING]. MIRRORING HDD IDE1 IDE2 CAPACITY 149GB 149GB STATUS NORMAL NORMAL provided in Changing MENU Settings (page 17) in the sequence of [MENU] [OPERATION MENU] [MAINTENANCE] [MIRRORING]. MIRRORING HDD IDE1 IDE2 CAPACITY 149GB 149GB STATUS NORMAL NORMAL The mirroring is being operated. MIRRORING RELEASE/RECOVERY EXEC 2. The mirroring operation can be set. MIRRORING SET EXEC 2. · The MIRRORING screen will be displayed. Check to confirm that the "The mirroring is being operated. " message is displayed, and then press the [SET] button. 2. Check to confirm that the "The mirroring operation can be set. " message is displayed, and then press the [SET] button. · The "Do Mirroring EXEC?" confirmation screen will be displayed. [. . . ] SENSE Commands (continued) · ALARM MODE SENSE (D9H) [JVC-1] Returns the status data for the alarm recording settings. The status at the time of operations will be returned when in the timer mode. ) · VR MODE SENSE (DAH) [JVC-1] Returns the status data for the operation settings. TXD RXD DAH TXD RXD D9H 1st byte 2nd byte 3rd byte 6th byte VR MODE SENSE Return Data 1st byte 2nd byte 3rd byte 19th byte byte No. bit 7 bit 6 bit 5 bit 4 bit 3 bit 2 bit 1 bit 0 bit 7 bit 6 bit 5 bit 4 bit 3 bit 2 bit 1 bit 0 bit 7 bit 6 bit 5 bit 4 bit 3 bit 2 bit 1 bit 0 bit 7 bit 6 bit 5 bit 4 bit 3 bit 2 bit 1 bit 0 bit 7 bit 6 bit 5 bit 4 bit 3 bit 2 bit 1 bit 0 bit 7 bit 6 bit 5 bit 4 bit 3 bit 2 bit 1 bit 0 Skip Settings Not defined: "0" output Continuous skip playback: 00: OFF, 01: 1 second, 10: 5 seconds, 11: 10 seconds Time jump settings: 000: 1minute, 001: 5 minutes, 010: 10 minutes, 011: 30 minutes, 100: 1 hour, 101: 4 hours, 110: 1 day, 111: 1 week Skip button settings: 00: Time, 01: Alarm, 19: Event Operation Settings 1/5 Repeat recording: 00: OFF, 01: Alarm lock, 10: All "1" output with the operation lock release method at [Passcode]. Range of operation lock activation: 00: OFF, 01: Prohibit stop recording, 10: Prohibit all, 11: User settings "1" output with rec indicator at [ON]. [. . . ]