User manual JVC UX-VJ5V

[. . . ] Der Schalter unterbrichet in keiner Stellung die Stromversorgung vollkommen. Die Stromversorgung kann mit der Fernbedienung ein- und ausgeschaltet werden. Le commutateur ne coupe jamais compltement la ligne de secteur, quelle que soit sa position. Om de stroomtoevoer geheel uit te schakelen, trekt u de stekker uit het stopkontakt. [. . . ] Case 3: If the FM station you are listening to is broadcasting the program type you have selected The broadcast station being currently heard will continue to be heard. The program type (TA, NEWS or INFO) indicator starts flashing. (On the Remote Control) or DOWN UP When the program is over, this Unit goes back to the currently selected station, but still remains in EON Standby mode. Notes: If the EON is in standby mode and the source (CD, TAPE, AUX) is changed or the power is switched off, then the EON mode will be released. When the band is set to FM again, the EON will be set to standby mode. the selected program type is being received from the broadcast station) and if the DISPLAY MODE or 4, button (or the </>/DOWN/UP button on the Remote Control) is operated, the station will not switch back to the current selected station even after the program ends. The program type indicator remains in the display, indicating that the EON is in standby mode. When the EON is in standby mode and a radio broadcast is being recorded, be careful because the EON may be activated and a different program than the intended one may be recorded. When the alarm signal is detected by EON, the station broadcasting the alarm is received with priority. "ALARM" is not displayed. (On the Unit) 1 Press the PTY/EON button on the Remote Control twice while listening to an FM station. The display alternates between "EON" and "SELECT. " 2 Select the program type with the 4 or button on the Unit (or the UP or DOWN button on the Remote Control) within 10 seconds. The display shows a program type in the following order: TA: Traffic Announcement NEWS: News INFO: Programs on medical service, weather forecast, etc. OFF: Canceled 3 Press the PTY/EON button on the Remote Control again within 10 seconds to set the selected program type. The selected program type indicator lights up on the display, and the Unit enters EON Standby mode. Case 1: If there is no station broadcasting the program type you have selected The broadcast station being currently heard will continue to be heard. CAUTION: When the sound alternated intermittently between the station tuned in by the EON function and the current selected station, cancel the EON mode. To delete all the tracks in the program while the CD player is stopped, press the 7 button. Pressing the CD 0 button on the Remote Control (or the CD OPEN/CLOSE 0 button on the Unit) to open the CD cover will also clear the programed tracks. To exit from the program mode while the CD player is stopped, press the 7 button to light off the PROGRAM indicator. Notes: If the total playback time of the programed tracks exceeds 99 minutes 59 seconds, "-- -- : -- --" appears on the display. If you try to program the 21st track, "FULL" appears on the display for about 2 seconds. Selecting a track During playback, press the 4 or button (or the </>/DOWN/ UP button on the Remote Control) to select the track you want. Press the button (or the >/UP button on the Remote Control) once to skip to the beginning of the next track. Press the 4 button (or the </DOWN button on the Remote Control) to skip to the beginning of the track being played. When the > or < button on the Remote Control is held down, the tracks are successively skipped. Selecting a passage within a track Holding down the 4 or button (or the DOWN/UP button on the Remote Control), during playback, will fast-forward/reverse the CD so you can quickly find a particular passage in the track you are listening to. Programing the Playing Order of the Tracks You can program the playing order of the tracks using the Remote Control. s You can program up to 20 tracks in any desired order including the same tracks. s You can only make a program when the CD Player is stopped. Modifying the program Modify the contents of the program while the CD Player is stopped. Each time you press the CANCEL button, the last track in the program is deleted. [. . . ] CAUTION: If the System is unplugged, or a power failure occurs, the timer will be canceled. You will need to reset the clock first, then the timer. 21 English 7 Press the or 4 button until "TUNER" appears and the REC indicator lights up on the display. Setting the Sleep Timer English Care and Maintenance Handle your CDs carefully, and they will last a long time. Compact Discs Only CDs bearing this mark can be used with this System. However, continued use of irregular shape CDs (heart-shape, octagonal, etc. ) can damage the System. If there are fingerprints, etc. [. . . ]