User manual JVC UX-H330

[. . . ] MICRO COMPONENT SYSTEM UX-H330 UX-H300 Consists of CA-UXH330 and SP-UXH330 Consists of CA-UXH300 and SP-UXH300 INSTRUCTIONS LVT1193-003A [B] Warnings, Cautions and Others IMPORTANT for the U. K. If the plug fitted is not suitable for the power points in your home or the cable is too short to reach a power point, then obtain an appropriate safety approved extension lead or consult your dealer. BE SURE to replace the fuse only with an identical approved type, as originally fitted. If nonetheless the mains plug is cut off ensure to remove the fuse and dispose of the plug immediately, to avoid a possible shock hazard by inadvertent connection to the mains supply. [. . . ] After loading the disc, the first track of the disc starts playing. When playing audio CD: CD 3/8 Notes for MP3 files The player can only recognize files with "MP3" or "mp3" as the extensions, which can be in any combination of upper and lower case. This unit recognizes files and folders on a disc in the following conditions: up to 640 MP3 files. It is recommended that you record your material at a 44. 1 kHz sampling rate, using the 128 kbps data transfer rate. Some MP3 files or discs may not be played back because of their characteristics or recording conditions. MP3 discs requires a longer readout time than normal discs because of the complexity of the folder/file configuration. MP3i and MP3 Pro are not available. When playing MP3 disc: MP3 indicator MP3 Current track Elapsed playing time number Current track Elapsed number playing time The disc automatically stops when the last track has finished playing. While "READING" appears on the display You cannot make any operation until the unit finishes reading the disc. While playing back an MP3 disc ID3 Tag information (the name of the title, artist, and album up to 30 characters) will be shown on the display. When the name is too long to be displayed at once, it is scrolled. General notes In general, you will have the best performance by keeping your discs and the mechanism clean. Continued use of irregular shape discs (heart-shape, octagonal, etc. ) can damage the unit. To stop playing, press 7. The total track (or group) number and total playing time appear on the display. When stop playing audio CD: UP PRESET GROUP DOWN PRESET GROUP When stop playing MP3 disc: Group folder indicator MP3 Total track Total playing number time Total group number Total track number Total playing time does not appear when MP3 disc is loaded. 10 To remove the disc, press ) OPEN on the unit, then take out the disc by holding it at the edges while pressing the unit's pivot lightly. To locate a particular point in a track During play, press and hold or 4 (or UP or DOWN 4 on the unit). 4 (DOWN 4): Fast-reverses the tracks. While playing back an MP3 disc This function is not available. UP PRESET GROUP DOWN PRESET GROUP If the disc cannot be read correctly (because it is scratched, for example) or an unreadable CD-R or CD-RW is inserted Playback will not start. DO NOT open the disc cover by hand as it will be damaged. Programming the Track Playing Order --Program Play You can arrange the order in which tracks play before you start playing. You can program up to 40 tracks. Basic Disc Operations While playing a disc, you can do the following operations. To stop playing for a moment During play, press CD 3/8. While pausing, current track number and elapsed playing time flash on the display. To resume playing, press CD 3/8 again. CD On the remote control ONLY: 3/8 1 Place a disc. If the current source is not the CD player, press CD 6, then 7 before going to the next step. 2 Press PROGRAM. UP PRESET GROUP PROGRAM To go to another track Before or during play, press or 4 (or UP or DOWN 4 on the unit) repeatedly. (UP ): The PRGM (program) indicator appears on the display. DOWN PRESET GROUP PRGM Skips to the beginning of the next or succeeding tracks. 4 (DOWN 4): Goes back to the beginning of the current or previous tracks. 3 Press or 4 to select the track number, then press PROGRAM. Track number Program step number UP PRESET GROUP DOWN PRESET GROUP To go to another track directly using the number buttons On the remote control ONLY: Pressing the number button(s) before or 1 2 3 during play allows you to start playing the track number you want. (For MP3 disc only) For track number 20, press OVER, then press 0, 2, 0. For track number 156, press OVER, then press 1, 5, 6. PRGM PROGRAM You can also use the number button(s) to select a track number. For the operation of the number buttons, see "To go to another track directly using the number buttons" on the left column. 1 2 3 4 5 6 7 8 9 OVER 0 When you are programming from MP3 disc Pressing PRESET GROUP or PRESET GROUP selects the first track of each group. 11 Continued 4 Repeat step 3 to program other tracks you want. Repeating Tracks--Repeat Play You can have all the tracks, the program or individual track currently playing, repeat as many times as you like. 5 Press CD 3/8. The tracks are played in the order you have programed. CD 3/8 On the remote control ONLY: Press REPEAT repeatedly before or during playback. REPEAT RDS SEARCH If you try to program a 41st track " FULL " will appear on the display. Each time you press the button, Repeat Play changes as follows, and the following repeat indicators light up on the display: UP PRESET GROUP To stop playing, press 7. DOWN PRESET GROUP ALL Repeat indicators When playing back audio CD: To check the program contents You can check the program contents by pressing PROGRAM repeatedly before or after playback. PROGRAM ALL Canceled To modify the program Press PROGRAM repeatedly until the program step number you want to modify appears. To add tracks in the program, press PROGRAM repeatedly until "0" appears as the track number. Then follow steps 3 of the programming procedure. PROGRAM ALL: In Normal Play, repeats all the tracks. [. . . ] Turning off the unit also cancels the Sleep Timer. 23 Maintenance To get the best performance of the unit, keep your discs, tapes and mechanism clean. General Notes In general, you will have the best performance by keeping your discs, tapes and the mechanism clean. Store discs and tapes in their cases, and keep them in cabinets or on shelves. Handling cassette tapes If the tape is loose in its cassette, take up the slack by inserting a pencil in one of the reels and rotating. If the tape is loose, it may get stretched, cut, or caught in the cassette. Be careful not to touch the tape surface. Cleaning the unit Stains on the unit Should be wiped off with a soft cloth. [. . . ]