User manual JVC UX-G3

[. . . ] MICRO COMPONENT SYSTEM UX-G4 UX-G3 Consists of CA-UXG4 and SP-UXG4 Consists of CA-UXG3 and SP-UXG3 INSTRUCTIONS LVT1364-002C [B] Warnings, Cautions and Others IMPORTANT for the U. K. If the plug fitted is not suitable for the power points in your home or the cable is too short to reach a power point, then obtain an appropriate safety approved extension lead or consult your dealer. BE SURE to replace the fuse only with an identical approved type, as originally fitted. If nonetheless the mains plug is cut off ensure to remove the fuse and dispose of the plug immediately, to avoid a possible shock hazard by inadvertent connection to the mains supply. [. . . ] Some CD-Rs or CD-RWs may not play on this unit because of their disc characteristics, damage or stain on them, or if the player's lens is dirty. This is because the reflectance of CD-RWs is lower than for regular discs. 3 Close the disc cover gently. 4 Press CD 6. The unit automatically turns on and the source changes to the CD player. After loading the disc, the first track of the disc starts playing. When playing audio CD: CD 3/8 When playing MP3 disc: MP3 indicator MP3 Notes for MP3 files The player can only recognize files with "MP3" or "mp3" as the extensions, which can be in any combination of upper and lower case. This unit recognizes files and folders on a disc in the following conditions (including the root folder): up to 512 folders and files. It is recommended that you record your material at a 44. 1 kHz sampling rate, using the 128 kbps data transfer rate. Some MP3 files or discs may not be played back because of their characteristics or recording conditions. MP3 discs requires a longer readout time than normal discs because of the complexity of the folder/file configuration. MP3i and MP3 Pro are not available. Current track Elapsed playing time number Current track Elapsed number playing time The disc automatically stops when the last track has finished playing. While "READING" appears on the display You cannot make any operation until the unit finishes reading the disc. While playing back an MP3 disc ID3 Tag information (the name of the title, artist, and album up to 30 characters) will be shown on the display. 1. 0. UP General notes In general, you will have the best performance by keeping your discs and the mechanism clean. Continued use of irregular shape discs (heart-shape, octagonal, etc. ) can damage the unit. To stop playing, press 7. The total track (or group) number and total playing time appear on the display. When stop playing audio CD: PRESET GROUP DOWN PRESET GROUP When stop playing MP3 disc: Group folder indicator MP3 TOTAL TOTAL Caution for DualDisc playback The Non-DVD side of a "DualDisc" does not comply with the "Compact Disc Digital Audio" standard. Therefore, the use of Non-DVD side of a DualDisc on this product may not be recommended. Total track Total playing number time Total group number Total track number Total playing time does not appear when MP3 disc is loaded. 10 Tag To remove the disc, press ) OPEN on the unit, then take out the disc by holding it at the edges while pressing the unit's pivot lightly. To locate a particular point in a track During play, press and hold or 4 (or UP or DOWN 4 on the unit). 4 (DOWN 4): Fast-reverses the tracks. UP PRESET GROUP DOWN PRESET GROUP If the disc cannot be read correctly (because it is scratched, for example) or an unreadable CD-R or CD-RW is inserted Playback will not start. DO NOT open the disc cover by hand as it will be damaged. Programming the Track Playing Order --Program Play You can arrange the order in which tracks play before you start playing. You can program up to 60 tracks. On the remote control ONLY: Basic Disc Operations While playing a disc, you can do the following operations. 1 Place a disc. If the current source is not the CD player, press CD 6, then 7 before going to the next step. CD To stop playing for a moment During play, press CD 3/8. To resume playing, press CD 3/8 again. 3/8 2 Press PROGRAM. The PRGM (program) indicator starts flashing on the display. PROGRAM To go to another track Before or during play, press or 4 (or UP or DOWN 4 on the unit) repeatedly. (UP ): PRGM UP PRESET GROUP 3 Press or 4 to select the track number, then press PROGRAM. Track number Program step number UP PRESET GROUP DOWN PRESET GROUP Skips to the beginning of the next or succeeding tracks. 4 (DOWN 4): Goes back to the beginning of the current or previous tracks. DOWN PRESET GROUP PROGRAM PRGM To go to another track directly using the number buttons On the remote control ONLY: Pressing the number button(s) before or 1 2 3 during play allows you to start playing the track number you want. (For MP3 disc only) For track number 20, press OVER, then press 0, 2, 0. For track number 156, press OVER, then press 1, 5, 6. You can also use the number button(s) to select a track number. [. . . ] Turning off the unit also cancels the Sleep Timer. 23 Maintenance To get the best performance of the unit, keep your discs, tapes and mechanism clean. General notes In general, you will have the best performance by keeping your discs, tapes and the mechanism clean. Store discs and tapes in their cases, and keep them in cabinets or on shelves. Handling cassette tapes If the tape is loose in its cassette, take up the slack by inserting a pencil in one of the reels and rotating. If the tape is loose, it may get stretched, cut, or caught in the cassette. Be careful not to touch the tape surface. Cleaning the unit Stains on the unit Should be wiped off with a soft cloth. [. . . ]