User manual JVC TH-S5

[. . . ] DVD DIGITAL CINEMA SYSTEM TH-S8 Consists of XV-THS8, SP-PWS8, SP-THS9F, SP-THS9C and SP-THS9S TH-S5 Consists of XV-THS5, SP-PWS5, SP-THS5F, SP-THS5C and SP-THS5S TH-S51 Consists of XV-THS51, SP-PWS51, SP-THM303F, SP-THM303C and SP-THM303S INSTRUCTIONS LVT1148-003C [B] Warnings, Cautions and Others IMPORTANT for the U. K. DO NOT cut off the mains plug from this equipment. If the plug fitted is not suitable for the power points in your home or the cable is too short to reach a power point, then obtain an appropriate safety approved extension lead or consult your dealer. BE SURE to replace the fuse only with an identical approved type, as originally fitted. If nonetheless the mains plug is cut off ensure to remove the fuse and dispose of the plug immediately, to avoid a possible shock hazard by inadvertent connection to the mains supply. [. . . ] To clear the key number entry Perform whichever one of the following: · Press 7. · Turn off the system. 23 Advanced operations · The icon such as available for. shows the types of discs the operation is Using the surround mode 7 Auto Surround (AUTO SURR) Used to reproduce the sound as it is recorded without any conversion (downmixing or simulation, etc. ). For example, a multichannel source is automatically reproduced in multichannel audio. IMPORTANT Before using the remote control for the following operation; 1 Set the remote control mode selector to AUDIO. In such a case, follow each instruction. The buttons described below are used on pages 24 to 35. AUDIO SUBTITLE SURR. 7 Dolby Surround Dolby Pro Logic II*1 Dolby Pro Logic II has a newly developed multichannel playback format to decode all 2 channel sources -- stereo source and Dolby Surround encoded source -- into a 5. 1 channel. Dolby Pro Logic II has two modes -- Movie mode and Music mode: · Pro Logic II Movie (PL II MOVIE) (play button) AUDIO Remote control mode selector Suitable for reproduction of Dolby Surround encoded sources bearing the mark . · Pro Logic II Music (PL II MUSIC) Suitable for reproduction of any 2 channel stereo music sources. TOP MENU MENU Cursor (3/2/Y/5)/ ENTER ENTER ON SCREEN Dolby Digital*1 Used to reproduce multichannel soundtracks of the software encoded with Dolby Digital ( ). 7 DTS Digital Surround*2 Used to reproduce multichannel soundtracks of the software encoded with DTS Digital Surround ( ). DTS Digital Surround (DTS) is another discrete multichannel digital audio format available on CD and DVD software. ANGLE ZOOM PAGE 100+ Number buttons REPEAT A-B RPT PLAY MODE CANCEL SETTING RETURN VFP Available Surround modes for each input signal The B marks show available surround modes. Mode Signal Dolby Digital (Multichannel) Dolby Digital (2 channel) DTS Digital Surround (Multichannel) DTS Digital Surround (2 channel) Analog (VCR) or Linear/Packed PCM (2 channel) Surround off SURR OFF Auto Surround AUTO SURR Dolby Surround PL II PL II MOVIE*3 MUSIC*3 Dolby Digital DTS Digital Surround DTS Linear PCM LPCM Packed PCM PPCM DSP ALL CH ST. *3 *1 B B B B B B B B -- B -- B B -- B -- B B B -- -- -- -- -- B -- -- -- -- -- -- -- -- -- -- B -- B B B B B B -- -- -- B -- B Manufactured under license from Dolby Laboratories. "Dolby", "Pro Logic", "MLP Lossless", and the double-D symbol are trademarks of Dolby Laboratories. *2 "DTS" and "DTS Digital Surround" are registered trademarks of Digital Theater Systems, Inc. 25) Linear/Packed PCM (Multichannel) -- -- -- -- -- Continued on next page 24 Advanced operations 7 All Channel Stereo (DSP) All Channel Stereo (ALL CH ST. ) mode can reproduce a larger stereo sound field using all the connected (and activated) speakers. All Channel Stereo can be used while reproducing 2 channel stereo source. Normal stereo sound All Channel Stereo See page 24 for button locations. 7 When playing back digital multichannel software (except during SURR OFF mode) The appropriate multichannel surround mode (Dolby Digital, DTS Digital Surround or Linear/Packed PCM) is automatically selected. 7 When playing back 2 channel source You can select either mode of Dolby Pro Logic II (PL II MOVIE/ PL II MUSIC) or the DSP (ALL CH ST. ) mode. Press SURR. repeatedly to select the desired mode. 7 Indicators on the display window Digital signal format indicators PPCM: Lights when DVD AUDIO packed PCM signals comes in. No indication: No digital signal indicator lights when analog signals come in. Dolby Surround/DSP mode indicators GPLII: Lights when Dolby Pro Logic II mode is activated. h: Lights when the monaural surround channel signal or 2 channel Dolby Surround signal comes in. The channel with " " shows that the corresponding speakers are reproducing the channels' sound. If the channels' sound decoded into 5. 1 channel is reproduced, only " " lights. The surround mode is turned on and the current surround mode appears on the display window. repeatedly until SURR OFF appears on the display window. Storing adjustments -- auto memory When you turn the power off, the system memorizes the current surround mode. The memorized mode is automatically recalled when you turn the power on. NOTE · When FM or AM is selected as the source, you cannot select any surround mode. · Note that the surround mode takes no effect on MPEG4 playback. [. . . ] · Enhanced Other Network data sent from some stations may not be compatible with this system. · Enhanced Other Network does not function for some FM stations with RDS service. · While listening to a program tuned in by the Enhanced Other Network function, the station does not change even if another network station starts broadcasting a program of the same Enhanced Other Network data. · While listening to a program tuned in by the Enhanced Other Network function, you can only use TA/NEWS/INFO and RDS DISPLAY as the tuner operation buttons. TA: Traffic Announcement in your area. [. . . ]