User manual JVC RX-5042S

[. . . ] AUDIO/VIDEO CONTROL RECEIVER RX-5042S TA/NEWS/INFO DISPLAY MODE INSTRUCTIONS LVT1140-010A [B] Warnings, Cautions, and Others IMPORTANT for the U. K. If the plug fitted is not suitable for the power points in your home or the cable is too short to reach a power point, then obtain an appropriate safety approved extension lead or consult your dealer. BE SURE to replace the fuse only with an identical approved type, as originally fitted. If nonetheless the mains plug is cut off ensure to remove the fuse and dispose of the plug immediately, to avoid a possible shock hazard by inadvertent connection to the mains supply. [. . . ] No program type, undefined program, or difficult to categorize into particular types. Classification of the PTY codes for some FM stations may be different from the above list. 17 Receiving Radio Broadcasts Switching to a Program of Your Choice Automatically Another convenient RDS service is called "Enhanced Other Networks. " This allows the receiver to switch temporarily to a broadcast program of your choice (TA, NEWS, and/or INFO) from a different source except in the following cases: When you are listening to a non-RDS station--all AM (MW) and some FM stations. The Enhanced Other Networks mode only works when receiving an FM station with the Enhanced Other Networks code. The Enhanced Other Networks function is only applicable to preset FM stations. You can use the Enhanced Other Networks function while listening to any source. However, to use the RDS operation buttons on remote control, the remote control operation mode must be set for the tuner operations mode (see page 32). Each time you press the button, the program type(s) change, and the corresponding indicators light up on the display. When the current source is other than "FM" CASE 3 If a station starts broadcasting the program you have selected while listening to any source other than "FM" When a station is or starts broadcasting the program you have selected, the receiver automatically switches to the station. The indicator of received program type starts flashing. ` When the program is over, the receiver goes back to the previously selected source, but still remains in Enhanced Other Networks standby mode. The indicator of received program type stops flashing and remains lit. To stop listening to the program selected by the Enhanced Other Networks function Press TA/NEWS/INFO so that the program type (TA/NEWS/INFO) indicator stops flashing and remains lit. The unit enters the Enhanced Other Networks standby mode and goes back to the previously selected source. If an "ALARM" (or TEST) signal is received from a station, the receiver automatically tunes in to the station. While receiving an emergency broadcast, "ALARM" appears on the display. Therefore, it makes the unit work in the same way as the "ALARM" signal does. TA NEWS INFO TA/NEWS TA/INFO Canceled TA/NEWS/INFO NEWS/INFO TA: Traffic Announcement in your area. INFO: Program the purpose of which is to impart advice in the widest sense. Notes: Enhanced Other Networks data sent from some stations may not be compatible with this receiver. In Enhanced Other Networks standby mode, if you carry out synchronized recording (see page 31), Enhanced Other Networks standby mode is canceled temporarily. The receiver goes back to Enhanced Other Networks standby mode again when the recording is finished. While listening to a program tuned in by the Enhanced Other Networks function, you can only use the DISPLAY MODE and TA/NEWS/INFO buttons as the tuner operation buttons. While listening to a program tuned in by the Enhanced Other Networks function, you cannot change to another source or station. To change it, press TA/NEWS/INFO button first to cancel Enhanced Other Networks. When the current source is "FM" CASE 1 If the station currently tuned in starts broadcasting the program you have selected The receiver continues to receive the station, but the indicator of received program type starts flashing. ` When the program is over, the indicator of received program type stops flashing and remains lit, but the receiver remains in Enhanced Other Networks standby mode. CASE 2 If another FM station starts broadcasting the program you have selected while you are listening to an FM station CAUTION: When the source alternates intermittently between the station tuned in by the Enhanced Other Networks function and the currently selected source, press TA/NEWS/INFO repeatedly to cancel the Enhanced Other Networks function. If you do not press the button, the currently tuned station is received finally, and one of the TA/NEWS/INFO indicators flashing on the display disappears. The receiver automatically switches to the station. The indicator of received program type starts flashing. ` When the program is over, the receiver goes back to the station previously tuned in, but still remains in Enhanced Other Networks standby mode. [. . . ] To resume, press 3. 2 4 MENU After pressing DVD, these buttons can be used for the DVD menu operations. 6 8 Cassette deck After pressing TAPE/CDR, you can perform the following operations on a cassette deck: 3: REW: FF: 7: 8: REC PAUSE: Start playing. To start recording, press this button then 3. Note: For detailed menu operations, refer to the instructions supplied with the discs or the DVD player. 7/P ENTER 10 TV You can always perform the following operations: STANDBY/ON TV: Turn on or off the TV. After pressing TV SOUND, you can perform the following operations on the TV: 1 9, 0, 100+ (+10): Select the channels. RETURN (10): Alternate between the previously selected channel and the current channel. Operating Video Components IMPORTANT: To operate JVC's video components using the supplied remote control: Some JVC's VCRs can accept two types of the control signals-- remote code "A" and "B. " Before using this remote control, make sure that the remote control code of the target VCR is set to code "A. " When using the remote control, aim the remote control directly at the remote sensor on each component, not on the receiver. 33 Troubleshooting Use this chart to help you solve daily operational problems. [. . . ]