User manual JVC RVNB1C-RV-NB1 Instruction Manual

[. . . ] POWERED WOOFER CD SYSTEM RV-NB1 GROUP DOWN INSTRUCTIONS LVT1265-003B [B] Warnings, Cautions and Others IMPORTANT for the U. K. If the plug fitted is not suitable for the power points in your home or the cable is too short to reach a power point, then obtain an appropriate safety approved extension lead or consult your dealer. BE SURE to replace the fuse only with an identical approved type, as originally fitted. If nonetheless the mains plug is cut off ensure to remove the fuse and dispose of the plug immediately, to avoid a possible shock hazard by inadvertent connection to the mains supply. [. . . ] · Press ¢ once to skip to the beginning of the next track. For CD: Selected track and its playback time are shown on the display. For MP3: Group and track numbers (then ID3 Tag if any) are shown on the display. To start playback, press CD 6. The first track of the disc starts playing. For CDs: Track number Playback time For MP3 discs: MP3 indicator Search Play Press and hold 4 or ¢, during playback, will fast forward/ backwards the disc so you can quickly find a particular passage in the track you are listening to. one forth level. · When playing an MP3 disc, the file name (then ID3 Tag if any) is displayed at the beginning of each track. · If no disc is inserted, "NO DISC" appears on the display and the system remains in stop mode. · The system automatically stops when the last track of the disc has finished playing. For CDs: Total track number Total playback time To locate a track directly using the remote control only Press the number buttons to directly play a track. (Only for MP3 discs) · To directly play track 109, press +100 once then press 9. · To directly play track 125, press +100, +10, +10 then 5. For MP3 discs: Total group number* MP3 indicator * If a disc includes more than 99 groups, "G ­ ­" will appear on the display. Total track number To select a group (for MP3 disc) using remote control only While playing an MP3 disc, press GROUP UP or GROUP DOWN to select the group you want to play. To play the group after selection, press CD 6. To pause, press CD 6. Note: Do not turn the LOCK/RELEASE knob during playback. 11 Programming the playing order of the tracks Using the remote control I You can program up to 50 tracks in any desired order including the same tracks. I While making a program, you cannot specify a group number to select a track. Random play The tracks will play in no special order when you use this mode. Using the remote control 1. I Press PLAY MODE repeatedly to select "RANDOM". The RANDOM indicator lights up on the display. 1. I Press PLAY MODE repeatedly to select "PROGRAM". The system enters the programming mode and the PRGM indicator lights up. 5. I Press CD 6. The tracks are played in random order once. To skip a track during playback, press ¢ to skip to another track in the random sequence. The 4 button works only to go back to the beginning of the current track. While stopped: I To exit from random mode, press PLAY MODE repeatedly until the track number and total playback time appear on the display. Each time you press the button, the play mode changes as follows: Normal play = PROGRAM = RANDOM = (back to the beginning) 5. I Press the number buttons to select the track to program. · For detailed operations, see "To locate a track directly using the remote control only" on page 11. [. . . ] However, continued use of irregular shape discs (heart-shape, octagonal, etc. ) can damage the system. Moisture condensation · Remove the disc from its case by holding it at the edges while pressing the case's center hole lightly. · Do not touch the shiny surface of the disc, or bend the disc. · Be careful not to scratch the surface of the disc when placing it back in the case. · Avoid exposure to direct sunlight, temperature extremes, and moisture. [. . . ]