User manual JVC RV-NB10B

[. . . ] POWERED WOOFER CD SYSTEM RV-NB10B/RV-NB10W INSTRUCTIONS LVT1539-003A [B] Warnings, Cautions and Others IMPORTANT for the U. K. If the plug fitted is not suitable for the power points in your home or the cable is too short to reach a power point, then obtain an appropriate safety approved extension lead or consult your dealer. BE SURE to replace the fuse only with an identical approved type, as originally fitted. If nonetheless the mains plug is cut off ensure to remove the fuse and dispose of the plug immediately, to avoid a possible shock hazard by inadvertent connection to the mains supply. [. . . ] · This system is not compatible with the other discs such as DVD, DVD-R, and DVD-RW. Notes on MP3: · The system can only recognize files (tracks) with "MP3" or "mp3" as the extensions, which can be in any combination of upper and lower case. · It is recommended that you record your material at a 44. 1 kHz sampling rate, using the 128 kbps data transfer rate. · You can play back the discs containing the tracks in music CD format or MP3 files in ISO 9660 format. · Some MP3 tracks or discs may not be played back because of their characteristics or recording conditions. · MP3 discs require a longer readout time than normal discs. · This system recognizes up to 999 tracks on a disc (or less depending on the recording condition of a disc). Setting a disc 1. Turn the LOCK/RELEASE knob counterclockwise to open the disc compartment door. 2. Place disc, shownaabove. with its label side up as 3. Close the disc compartment the knob to "LOCK" position. door and turn To remove the disc, open the disc compartment door in stop mode. If the disc cannot be read correctly (because it is scratched, for example), "NO PLAY" or "NO DISC" appears on the display. You can place a disc while listening to the other source. Group with its play order MP3 track with its play order 10 Using the disc player--Normal Play To play a disc 1. Set a disc. track of the For CDs: Track number Playback time Skip Play Press 4 or ¢ to select the track you want to play during playback. · Press ¢ once to skip to the beginning of the next track. For CD: Selected track and its playback time are shown on the display. For MP3: Group and track numbers (then ID3 Tag if any) are shown on the display. To start playback, press CD 6. For MP3 discs: Search Play MP3 indicator Press and hold 4 or ¢ to fast forward/ reverse the disc during playback. You can quickly find a particular passage in the track you are listening to. one forth level. · When playing an MP3 disc, the file name (then ID3 Tag if any) is displayed at the beginning of each track. · If no disc is inserted, "NO DISC" appears on the display and the system remains in stop mode. · The system automatically stops when the last track of the disc has finished playing. For CDs: Total track number Total playback time To locate a track directly Using the remote control only Press the number buttons to directly play a track. · To directly play track 5, press 5. (Only for MP3 discs) · To directly play track 109, press +100 once then press 9. · To directly play track 125, press +100, +10, +10 then 5. For MP3 discs: Total group number* Total track number To select a group (for MP3 disc) Using the remote control only Press GROUP UP or GROUP DOWN to select the group you want to play during playing the MP3 disc. · Press · Press GROUP UP to skip to the next group. GROUP DOWN to skip to the previous group. MP3 indicator * If a disc includes more than 99 groups, "G ­ ­" will appear on the display. To pause, press CD 6. Note: Do not turn the LOCK/RELEASE knob during playback. You can also select a group in stop mode with the same buttons. To play the group after selection, press CD 6. 11 Programming the playing order of the tracks Using the remote control only You can program up to 50 tracks in any desired order including the same tracks. [. . . ] · Do not touch the shiny surface of the disc, or bend the disc. · Be careful not to scratch the surface of the disc when placing it back in the case. · Avoid exposure to direct sunlight, temperature extremes, and moisture. If a disc does become dirty, wipe it with a soft cloth in a straight line from center to edge. [. . . ]