User manual JVC RD-MD5

[. . . ] RD-MD5(B)-Cover. fm Page 1 Wednesday, December 2, 1998 11:39 AM POWERED WOOFER CD-MD SYSTEM RD-MD5 INSTRUCTIONS For Customer Use: Enter below the Model No. Serial No. LVT0107-006A [B] RD-MD5(B)-Warning. fm Page 1 Wednesday, December 2, 1998 11:41 AM Warnings, Cautions and Others IMPORTANT FOR LASER PRODUCTS REPRODUCTION OF LABELS 1 CLASSIFICATION LABEL, PLACED ON EXTERIOR SURFACE IMPORTANT for the U. K. If the plug fitted is not suitable for the power points in your home or the cable is too short to reach a power point, then obtain an appropriate safety approved extension lead or consult your dealer. BE SURE to replace the fuse only with an identical approved type, as originally fitted. [. . . ] Press the 4 button or turn the JOG dial to the left to jump back to the start of a track being played. To exit Random Play mode, press the RANDOM button to light off the "RANDOM" indicator after pressing the 7 button to stop the MD Player, press the 0MD button to eject the MD, or turn off the power. 5. s Press the number keys to select the track to program. To select the track 5, press 5. · Example: for track 2, press 2. Program order number (After 2 seconds) Total playback time of the programmed tracks 12 RD-MD5(B)-e. fm Page 13 Wednesday, December 2, 1998 11:40 AM Repeating Tracks You can repeat the tracks or individual track as many times as you like. Press the REPEAT button on the Remote Control. The Repeat indicator changes with each press of the button, as shown below. To exit Repeat mode, press the REPEAT button until the Repeat indicator on the display goes out. s Repeat mode remains in effect when you change the play mode. 13 RD-MD5(B)-e. fm Page 14 Wednesday, December 2, 1998 11:40 AM s Recording onto an MD s DISPLAY CD 6 MD 6 MD 6 CD 6 MD REC DISPLAY /CHARA. MD REC indicator Track number, Playing time 7 When the System is in use, the display shows other items as well. For simplicity, we show here only the items described in this section. Just insert an MD to the Unit, have the source ready, make one or two settings, and you are ready to record. For each source, the procedure is a little bit different so we explain each separately. But first, here are a few things to make your recordings better. MD indicator Music calender OVER indicator which lights up if the number of tracks of the MD exceeds 20. (See "Checking the Remaining Time of the MD for CD Synchro Recording" mentioned on page 15. ) Standard Recording You can record from the tuner or an auxiliary equipment to an MD as follows. Things To Know Before You Start Recording -------------------------- s It should be noted that it may be unlawful to re-record pre-recorded tapes, records, or discs without the consent of the owner of copyright in the sound or video recording, broadcast or cable programme and in any literary, dramatic, musical, or artistic work embodied therein. The MD Recorder supports the following sampling frequency for the CD Player of the Unit as a digital source. The recording level, which is the volume at which the new MD is being made, is automatically set correctly, so it is not affected by the VOLUME level of the System. Thus, during recording you can adjust the sound you are actually listening to without affecting the recording level. Note that it takes 10 seconds until the MD REC button becomes effective after the MD has been inserted. The accidental erasure prevention knob is provided on the back of an MD cartridge to prevent accidental erasure or recording. It must be set to the close position beforehand. Accidental erasure prevention knob 1. · For recording from the CD, see "CD Synchro Recording" on page 15. s s s 3. s Press the MD REC button on the Unit to start recording. The "MD REC" indicator lights up on the display and the track number is increased by 1. When recording starts, the remaining time (recordable capacity) appears on the display. Remaining time s s 4. s Press the 7 button to stop recording. The "MD REC" indicator goes out and "UTOCwriting" appears on the display, indicating that the recording is successfully completed. · If the MD becomes full before pressing the 7 button, the recording will be terminated after indicating "UTOCwriting". [. . . ] In this area, information such as the position where each track is recorded, the track divisions, and track order are listed. When music search is done, the UTOC is consulted, and the tracks are quickly found and played back. When editing is done, only the UTOC is changed, so there is no need to re-record the tracks. UTOC Track details Contents 1. Track C: Page 10 ÷ ÷ ÷ s MD Messages s Messsage BLANK DISC Meaning A disc has been inserted with nothing recorded on it. [. . . ]