User manual JVC RC-EZ35SC-RC-EZ35 Instruction Manual

[. . . ] FIRST THINGS ENGLISH This portable system operates on battery or AC power. NAMES OF PARTS AND CONTROLS Top and front sides: Main unit ADJUSTING THE SOUND Press VOLUME UP/DOWN (or VOL 5 or on the remote control unit) to increase or decrease the volume to desired level. The volume level can be adjusted in 41 steps from "MIN" to "MAX". · Turning off the sound temporarily During playback, press MUTING on the remote control unit to turn the sound off. · Reinforcing the bass sound Press HBS so that the HBS indicator appears in the display window. [. . . ] To quit random playback, press RANDOM again. PLAYING A CASSETTE TAPE 1. Insert a cassette tape into the compartment with the open edge up and the playback side facing out. Press REW ¡ or FF 1 to move the tape to the desired starting point. Playback continues until the tape reaches the end of the side, then automatically stops. Poor radio reception PROGRAM PLAY 1. Press PROGRAM/CLOCK SET to store the selected track number in the program. If you select more than 16 tracks, programmed tracks are overwritten from the first track. To confirm the order of programmed tracks, press PROGRAM/CLOCK SET in stop mode. "PROGRAM" disappears from the display. AC POWER Plug the AC power cord into the AC IN Ó jack on the back of the unit, and into an AC power outlet. For Your Safety The AC power plug is polarized (one blade is wider than the other) and only fits into AC power outlets one way. If the plug will not go into the outlet completely, turn the plug over and try to insert it the other way. If it will not still fit, contact a qualified electrician to change the outlet, or use a different one. ONLY USE JVC POWER CORD PROVIDED WITH THIS UNIT TO AVOID MALFUNCTION OR DAMAGE TO THE UNIT. BE SURE TO UNPLUG THE POWER CORD FROM THE OUTLET WHEN GOING OUT OR WHEN THE UNIT IS NOT IN USE FOR AN EXTENDED PERIOD OF TIME. CD doesn't play AC IN For Customer Use: Enter below the Model No. Retain this information for future reference. RECORDING ON A CASSETTE TAPE You can record from the radio or the CD player. It should be noted that it may be unlawful to re-record pre-recorded tapes, records, or discs without the consent of the owner of copyright in the sound or video recording, broadcast or cable program and in any literary, dramatic, musical, or artistic work embodied therein. AC outlet CD sound skips · Clean the CD (as explained in "CARE AND MAINTENANCE"). · Check for vibration or shock that may affect the unit; move the unit if necessary. · Inspect the recording head and clean it if necessary. INSTRUCTIONS Model No. Serial No. Distorted or noisy recordings PLAYING A CD-R OR CD-RW User-edited CD-Rs (Recordable) and CD-RWs (Rewritable) can be played only if they are already "finalized. " · You can play your original CD-Rs or CD-RWs recorded in music CD format. (However, they may not be played depending on their characteristics or recording conditions. ) · Before playing CD-Rs or CD-RWs, read their instructions and cautions carefully. · Some CD-Rs and CD-RWs may not be played on this unit because of their disc characteristics, damage or stain on them, or if the player's lens is dirty. (This is caused by the fact that the reflectance of CD-RWs is lower than that of regular CDs. ) ERASE PROTECTION When you record new material, the cassette deck records over whatever is on the tape. To protect a tape from accidental erasure, break off one or both plastic tabs (one for each tape side) of the cassette tape. [. . . ] STOP/EJECT § ­ Press to stop current tape activity, or to open the cassette compartment door when no buttons are active. Press again to resume tape play or tape record mode. PROGRAM PLAY 1. Press 4 (SKIP/SEARCH) or ¢ (SKIP/SEARCH) to select a track number. If you select more than 20 tracks, programmed tracks are overwritten from the first track. [. . . ]