User manual JVC RC-BZ5

[. . . ] CD PORTABLE SYSTEM RC-BZ6BU INSTRUCTIONS For Customer Use: Enter below the Model No. Serial No. LVT0490-002A [B] Warnings, Cautions and Others IMPORTANT FOR LASER PRODUCTS REPRODUCTION OF LABELS 1 CLASSIFICATION LABEL, PLACED ON EXTERIOR SURFACE IMPORTANT for the U. K. If the plug fitted is not suitable for the power points in your home or the cable is too short to reach a power point, then obtain an appropriate safety approved extension lead or consult your dealer. BE SURE to replace the fuse only with an identical approved type, as originally fitted. [. . . ] Repeat Play can be set to repeat all or just one of the tracks on the CD. One Touch CD Player (AC power only) -------------------- s Just press the CD 6 button. · The power is automatically turned on. If a CD is already inserted, "PLAY" is displayed and the CD will start playing from the first track. If no CD is inserted, "NO DISC" is displayed on the display and the CD Player remains in Stop mode. The first track of the CD begins playing. The CD Player automatically stops when the last track of the CD has finished playing. · During playback, the track number being played and the playback time elapsed are shown on the display. The following information for the CD is displayed. Total number of tracks · Normal Play 1. s Press the CD OPEN button on the Unit. The CD holder opens. Playback time elapsed 2. Notes: · You can place an 8 cm (3'') CD without an adaptor. · If the CD cannot be read correctly (because it is scratched, for example), "000000" appears on the display. · Even if other function is selected during playing the CD, the last track is memorized. 6 Skip Play (4 or ¢)---------------- During playback, press the 4 or ¢ button to select the track you want. · Press and release the ¢ button to go forward one track at a time. · Press and release the 4 button to go back one track at a time. During playback, enter the number of the track you want to listen to using the number keys. For track 32, press +10 three times, then 2. Repeat Play You can repeat one track or all the tracks on a CD. During, or before playback, press the REPEAT button on the Remote Control to select the Repeat mode. The Repeat indicator changes with each press of the button, as shown below. To exit Repeat mode, press the REPEAT button until the Repeat indicator on the display goes out. Search Play ------------------------ During playback, hold down the 4 or ¢ button. This operation will fast forward/backwards the CD so you can quickly find a particular passage in the track you are listening to (the CD is played slowly for a moment and then the playback speed increases). Locating a Track directly with the Remote Control -------------------- Using the number keys on the Remote Control allows you can go directly to the beginning of any track. s Using the Cassette Deck s 8 (Listening to a Tape) TAPE indicator/Analog clock (Display when using the Cassette Deck) § 1 ¡ PLAY The Cassette Deck allows you to play and record audio tapes. Notes: · The Cassette Deck performs best with normal tapes (metal or CrO2 tapes are not recommended). · The use of tapes longer than 120 minutes is not recommended, since characteristic deterioration may occur and these tapes easily jam in the pinch-roller and the capstan. 4. s Press the PLAY · · TAPE button. One Touch Play (AC power only) -- Just press the PLAY TAPE button on the Unit. The power is automatically turned on, "TAPE" is displayed, and if a tape is already in the deck, it will start to play. The tape is played and then stops when it reaches the end. To remove the tape, stop the tape, and press the § STOP/ EJECT button again. Playback 1. [. . . ] To change the timer setting, repeat the setting procedure from the beginning. CAUTION: If the Unit is unplugged, or a power failure occurs, the timer setting will be lost after approx. You will need to reset the clock first, then the timer. Cancelling the Daily Timer To cancel the Daily Timer, turn off the Timer indicator as follows: (Hold for 2 seconds) (2 time) 1. s Press the CLOCK/TIMER button . The Timer indicator and the CLOCK indicator go out. [. . . ]