User manual JVC MX-D452TR

[. . . ] BE SURE to replace the fuse only with an identical approved type, as originally fitted. If nontheless the mains plug is cut off ensure to remove the fuse and dispose of the plug immediately, to avoid a possible shock hazard by inadvertent connection to the mains supply. If this product is not supplied fitted with a mains plug then follow the instructions given below: IMPORTANT. DO NOT make any connection to the terminal which is marked with the letter E or by the safety earth symbol or coloured green or green-and-yellow. [. . . ] To stop playing the disc, press the 7 button (or the 7/CLEAR button on the Remote Control). To stop playing and removing the disc, press the 0 button for the disc being played. To pause, press the </8 button (or the /8 button on the Remote Control). To cancel pause, press the </8 button again (or press the /8 button on the Remote Control). Play continues from the point where it was paused. To Select a Disc, Track Or Passage Within a Track ------ 1. Press the DISC button (1-3) for the disc tray containing the track you want to listen to. P. Press the 4 P. DOWN or P. UP button to select the track. The selected track starts playing. Each time you briefly press and release the 4 P. DOWN or P. UP button, the track changes by one. Press and release the 4 P. DOWN button to go back one track at a time. Holding down the 4 P. DOWN or P. UP button, during playback, will fast forward/backwards the CD so you can quickly find a particular passage in the selection you are listening to. When using the Remote Control, press the 4 or button. or Locating a Track With the Remote Control Directly ------ Using the number keys on the Remote Control allows you to go directly to the beginning of any track. DISC DISC 1. The Repeat mode indicators light up in sequence with each press of the REPEAT button. o o To stop playing, press the 7 button (or the 7/CLEAR button on the Remote Control) once. To delete all the tracks in a program, press the 7 button on the Unit or the 7/CLEAR button on the Remote Control while the CD Player is stopped. The program is deleted and the "PRGM" play mode indicator goes out and Normal Play is resumed. To cancel program play, press the PLAY MODE button on the Remote Control while the CD Player is stopped to select a different Play mode. The "PRGM" indicator goes out and the next Play mode is selected. Note: If you press the CONTINUE or RANDOM button on the unit while a program is playing, the play mode changes to that mode. Random Play The tracks will play in no special order when you use this mode. RANDOM On the Unit Press the RANDOM button. You can press the RANDOM button while a CD is playing to switch to Random play mode. On the Remote Control PLAY MODE 1. Press the PLAY MODE button while the CD Player is stopped, to select A. BASS EX "RANDOM". The display changes with each press of the PLAY MODE button as shown below. S. MODE = PROGRAM = RANDOM = CONTINUE = No display = (back to the beginning) /8 2. Press the REPEAT button before or during random play to instruct the System to continue with a different random track selection after the last selection is played. The "RANDOM" play mode indicator goes out and Normal Play is resumed. [. . . ] Remove the CD from the case by holding it at the edges while pressing the centre hole lightly. Be careful not to scratch the surface of the CD when placing it back in the case. Avoid exposure to direct sunlight, temperature extremes, and moisture. If a CD does become dirty, wipe it with a soft cloth in a straight line from centre to edge. Cassette Tapes If the tape is loose in its cassette, take up the slack by inserting a pencil in one of the reels and rotating. [. . . ]